Home (5)

Stema

ER29

Drying and reactivation machine for adhesive on soles and shoes-boots with conveyor belt system.

The operator or operators applying adhesive manually or by machine place the sole and shoe/boot onto the conveyor belt
Inside the tunnel, the solvent contained in the adhesive is forcibly evaporated
At the end of the cycle, the press operator collects the shoe and sole perfectly reactivated and ready for assembly

Sagitta

LO1

Hydraulic last pulling machine designed for removing lasts from all types of footwear using either a four-section pad or a high pad with six grooves.

The LO1 is equipped with a vertically lifting pad and can be fitted with two different pad types: a low pad with four impressions or a high pad with six grooves.

Comelz

SS20

Computerized skiving machine fully programmable through the control console, with storage capacity for up to 800 different skiving programs.

Possibility to electronically store skiving parameters such as thickness, width, inclination and feeding speed, as well as the distance between the blade and the presser foot.

The feeding roller allows continuous material feeding at the programmed speed or variable speed control through the pedal.

The machine is monitored by electronic sensors and automatically self-adjusts, reducing operator downtime and maintaining maximum efficiency of the working components.

Volber

153/3

Two-station brushing machine for final cleaning, with two speeds and single suction system, equipped with two built-in cyclone collectors, single suction unit and self-braking motor.

Cgc

Z-18

Punching machine for Ideal processing, suitable for perforating leather goods or, in sandal production, for punching strap slots in insoles.

The machine features an adjustable stroke for materials up to 10 mm thick
Punching is performed by means of a die/punch system operated by pedal control
The slot length is determined by the pedal pressing time, while the slot width depends on the diameter of the punch used
Available punch diameters: 2 mm – 2.4 mm – 3 mm – 3.5 mm – 4 mm
The 18-hole die can be supplied with all holes of the same size or with multiple sizes, up to a maximum of 5 different sizes
The hole dimensions correspond exactly to the punch diameters

Atom

S588/3

Hydraulic die-cutting machine with moving head and photoelectric safety barrier control system, featuring adjustable stroke up to 100 mm and 600 mm photoelectric safety barrier.

Omac

E30

The OMAC® E30 drying oven is designed for drying pre-coloured components of any size used in the production of leather goods accessories, footwear, watch straps and leather desk items.

Equipped with a heated single shelf complete with 2 trays.

Atom

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

ITM

PA 111

The PA 111 is a laminating press with book-type opening, designed to facilitate material positioning.

The machine is supplied with a dedicated mould for bonding reinforcements onto elastic sock uppers while simultaneously shaping the toe area.

Thanks to its lever system, it develops a high closing force and can alternatively be supplied, instead of the mould, with a flat working surface featuring felt and silicone on the lower side and PTFE paper on the upper side.

Atom

HS 588/10 CE

Hydraulic die-cutting machine with moving head and photoelectric safety barrier control system, featuring adjustable stroke up to 150 mm to adapt to the thickness of the materials or the number of layers to be cut.

Atom

SE 24C

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Atom

SE 20C

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Atom

S125C

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Atom

S 120

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Atom

S125

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Atom

SE 20

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Colli FGB

GP1

Machine for trimming excess flash from rubber, PVC and PU soles and boots.

Equipped with a high cutting speed, the “knife–counter-knife conveyor” system enables fast and precise trimming operations.

The machine is supplied with a profiled grinding wheel for sharpening the trimming knife.

ITM

FA 500

Automatic comb punching machine with pitch control and monitoring managed by PLC and touch-screen interface.

Capability to store programs with fixed or variable pitch, both in terms of length and repetitions, and to control the punching speed up to 300 strokes/min.

The comb pattern can be developed up to 80 mm across the entire working width and can be configured with multiple pitches (compatible with comb tools from other manufacturers). The tooling can also be configured with multiple rows of punching dies.

The punching depth can be adjusted during operation without dismantling or loosening any mechanical components.

Atom

MF 9.1

Hydraulic swing-arm die-cutting machine with “Multiforce” end-stroke system, requiring no cutting force adjustment and allowing immediate transition from small dies to large dies.

Sagitta

APN-08

Tape-applying machine complete with table and electronic variable-speed motor with automatic positioning.

This machine applies reinforcing tape to uppers and leather components.

A photo-sensor system activates the automatic tape-cutting device at the end of the upper in the optimal position. The tape can also be cut manually at any desired point during the operation.

Bramac

Bramac BR-50

Bench-mounted Hot Melt adhesive applicator with temperature adjustment and ergonomic gun.

Ergonomic gun
Interchangeable nozzles in different sizes and sections for every type of application (8 mm - 6 mm - 4 mm)
Temperature controller
Gun housing with glue collection tray
Glue tank integrated into the dispensing gun

Sps Tecnologia Meccanica

70.1.PN.A.PL

Eyelet machine with automatic eyelet feeding from magazine and manual washer positioning on the die.

Suitable for applying plastic eyelets.

Self-piercing system, no pre-punched material required for fastening plastic eyelets, with or without washer, in pneumatic versions.

Bramac

Bramac BR-02

Stool with polyurethane seat.

Volber

Volber 3

4-compartment men's last rack.

Volber

Volber 14

Lasting support column.

Volber

Volber 18

Sole carrier trolley for cutting department.

Volber

Volber 20

8-shelf die trolley.

Volber

Volber 21

Rotating upper carrier trolley.

Volber

Volber 23

54-drawer pattern storage cabinet.

Volber

Volber 25

27-drawer pattern storage cabinet.

Volber

Volber 32

2-station gluing hood with motor, designed for centralized suction system.

*Available in different versions.

Volber

153

Brushing machine with 2 built-in cyclone collectors, single suction unit and self-braking motor.

Nuova Obe

OBE 10/11 LP

Pneumatic single-shot machine designed to fasten insoles and insole boards to the last with nails, combined with an insole trimming unit. Available with push-button or foot-pedal operation upon request.

Nail specifications:

Cylindrical shank, 1.05 mm diameter
Domed head
Length from 12 to 16 mm

Sps Tecnologia Meccanica

97.VIS.E.10

Electric motor-driven machine for applying self-piercing lace hooks (Vis rings), particularly suitable for the production of footwear, sports footwear, mountain footwear, safety footwear, leather goods, corsetry, technical articles and similar products.

The machine is equipped with a vibrating feeder that ensures perfect feeding of the lace hooks, while riveting on the die can be round or star-shaped upon request.

Upon request, the machine can be supplied with a rotating elbow arm instead of the fixed vertical support, as well as with an optical projector for centering the application point.

The machine is operated by an electronic control unit and, when not in the application phase, electrical power consumption is zero.

Atom

SE 22

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Atom

SE 25C

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Atom

SE 25

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Atom

S120C

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Colli FGB

BS4

Beating and ironing machine equipped with a long anvil arm and, upon request, a support plate. It is used for beating and ironing uppers, boots and, in the leather goods sector, the seams of bags, suitcases, collars, handles, backrests and seats.

The machine is equipped with a heating system for the anvil foot.

The anvil temperature can be adjusted by means of a thermostat controller.

Sps Tecnologia Meccanica

2010.E2.B

Computerized machine for creating ornamental patterns with frame movement system.

An innovative interchangeability system allows applications on pieces such as uppers, boot legs and/or strips such as belts to be carried out on the same machine.

On request, interchangeability between studs, rivets, eyelets or simple punching can also be supplied.

Volber

P254

50 mm belt grinding machine with dual motors and double suction system.

Stema

ER28BA300

Drying and reactivation machine for water-based adhesive on soles and shoes-boots with conveyor belt system.

The operator or operators applying adhesive manually or by machine place the shoe-boot and sole onto the conveyor belt
Inside the tunnel, the water contained in the adhesive is evaporated
The air blown onto the adhesive is dehumidified
At the end of the cycle, the press operator collects the shoe and sole perfectly reactivated and ready for assembly

Volber

P254/A INS

Fireproof belt grinding machine with dual motors, double suction system and built-in cyclone collectors.

Sarema

ESA-CB

Electronic hydro-pneumatic seat beating machine equipped with a heated plate and roller, designed for flattening and shaping the heel seat area. It ensures a more accurate matching between the heel seat and the heel, significantly improving the overall quality of the shoe.

Features include adjustable roller rotation and 50 mm linear travel, movable column for boots, left- and right-shoe supports, double beating cycle, independent pressure settings (for beating and pressing operations), and adjustable roller vibration.

The machine is equipped with a soundproof enclosure featuring an automatic lifting door that does not affect cycle time and reduces noise levels to 83 dB(A).

Cerim

K58 S T.I. NO CE

Glue toe-lasting machine, electromechanical (non-electronic), hydraulic and automatic.

Standard equipment: unit for automatic edge injection of thermoplastic adhesive, automatic support column entry, last height adjustment, adjustable electro-hydraulic controls.

Cerim

K130

Programmable toe lasting and side lasting machine with nails and/or micro tacks.

Standard equipment: independent pincer pulling unit with automatic and manual operation, both vertical and horizontal, automatic and programmable device for differentiated right-left wiper arrangement, fully computerized and programmable unit for automatic nail application on the sides, movable head allowing upper adjustment.

Sps Tecnologia Meccanica

1590.E.10

Machine for applying self-piercing hooks with electric motor operation, particularly suitable for the production of sports footwear, safety footwear and for corsetry, orthopedic and other applications.

The machine is equipped with a feeder for automatic application of self-piercing hooks and with a rotating elbow arm allowing hook application even in difficult positions. Hook riveting on the die can be round or star-shaped.

Available on request with straight vertical support instead of the elbow arm and with optical projector for centering the application point.

Machine operation is controlled by an electronic control unit and, when not in application phase, electrical power consumption is zero.

Sps Tecnologia Meccanica

2004/10-PN.A

Automatic pneumatic machine for applying ornamental studs, particularly suitable for creating designs on leather, hide, plastic, fabric and similar materials in various sectors such as footwear manufacturing, leather goods, garment production, gift items and many others.

This machine is equipped with a special vibrating feeder ensuring perfect feeding of the studs into the magazine and then into the application clamp.

The 2004/10-PN.A is supplied with support working table and equipped with a luminous cross projector for positioning the stud at the desired point.

Fontana

TERMOVACUUM

Vacuum-operated hot-fix applicator for the heat application of metal studs and hot-fix rhinestones on fabric, leather, synthetic materials and similar substrates.

It can be used to apply any type of thermo-adhesive item, including shaped components.

The unit is equipped with a profiled heated tip, interchangeable according to the shape of the rhinestone or thermo-adhesive stud being applied.

When used with the vacuum system, the Thermo Vacuum applies loose accessories individually; when used without vacuum, it can apply pre-arranged designs supplied on transfer sheets.

Stema

RT07

Equipment for temperature control of two FS07 ironing tools.

Through the temperature controllers on the control panel, it is possible to adjust and maintain constant over time the temperature of the ironing tools from 50°C to 250°C.

If necessary, a jet of steam helps soften the leather.

Iron Fox

A 250 MP-F

Halogenating machine designed to perform treatment on a wide range of sole types, including box-edge soles, for which the supplied double nozzle is recommended.

Volber

303

Bonding machine with manual rotation of the iron working table, electronic temperature control and pressing plate with non-stick Teflon coating.

Cerim

K58 TP

Computerized hydraulic and automatic toe-lasting and side-lasting machine for thermoplastic and water-based adhesives.

Suitable for any type of processing, from children's footwear to all types of women's footwear, with any heel height, up to the largest men's sizes.

Programmable path for adhesive application on quarters and toe area directly onto the insole.

Standard equipment: quick-adjustment rod unit, independent pincer pulling unit with automatic and manual operation, both vertical and horizontal, tracing device for automatic spreading of thermoplastic adhesive on the insole, touch screen programming system.

Cerim

K24TP

Computerized toe-lasting machine with thermoplastic adhesive and nails.

Programmable path for thermoplastic adhesive application on quarters and toe area directly onto the insole.

Standard equipment: programmable spreading of thermoplastic adhesive on the insole, independent pincer pulling unit with automatic and manual operation, both vertical and horizontal, automatic and programmable device for differentiated right-left wiper arrangement, programmable rod unit, touch screen programming system.

Antolli

T.EC./A1

Electro-pneumatic bench-mounted tape cutting machine featuring:

Cold cutting unit with self-sharpening hardened steel blades arranged in a scissor configuration
Digital programmer for all machine functions
Material positioning by means of a stepper motor
Roll and spool holder
Material feed speed adjustable from 5 to 55 m/min

Sagitta

MB 10 C

Punching machine complete with a waste extraction system, driven by a variable-speed clutch motor.

The machine is equipped with a feed mechanism featuring straight-line feed dog movement and stitch/feed pitch adjustment by means of a graduated millimetric slide control.

Sagitta

FAS 7 BC

Perforating machine designed for punching lace holes in footwear uppers.

It allows the simultaneous perforation of both sides of the upper and enables the operator to select the number of holes to be punched, up to a maximum of 7 holes per side, by adjusting the perforator presser assembly.

The curvature of the perforation line can be adjusted using two control levers located on the sides of the machine.

A control knob positioned on the right side of the machine allows adjustment of the distance between the centres of consecutive holes.

The set of 7 perforators, complete with punches and dies, can be supplied in a range of 10 sizes from 1.8 mm to 4.8 mm.

Atom

S124 CE

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Atom

S124C CE

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Strobel

443-1

Heavy-duty machine designed for stitching insoles to uppers.

Compared with conventional attachment methods, the Strobel stitching process significantly reduces material consumption.

This machine is capable of sewing leather or textile materials up to 7 mm thick.

The gathering device assists in creating fullness while stitching the upper.

Optional equipment (different feed systems and front cups) enables the machine to manufacture children's footwear or process particularly delicate materials.

Kits are also available for cord attachment applications (using cords up to 1.7 mm or up to 2.5 mm in diameter) as well as for California-type footwear construction.

Camarb

Camarb N25-STR2S

Thigh performance sewing machine for shoe’s insoles and for other materials such as leather, fur, wool, mutton and fabrics.

Rotary feed dog and rear cup drive, chain stitch.

Useful for many applications: it is particularly suitable to sew mutton boots but also for nappa, wool, fur, leather and safety shoes.

Suitable also for finishing works of some upper’s sections and for the insole’s application to the upper.

These two parts are sewed by a flat and elastic stitch, which let to lightly improve the shoe’s outline.

Sps Tecnologia Meccanica

TOR3

Manual bench press with 95 mm throat depth and 3,900 kg pressing force.

Sps Tecnologia Meccanica

TOR4

Manual bench press with 125 mm throat depth and 4,200 kg pressing force.

Sps Tecnologia Meccanica

962.01

Punching machine for perforating materials with needle punches or multiple punch blocks, suitable for footwear manufacturers, leather goods producers, leather garment manufacturers and similar applications.

This machine is driven by a clutch motor, like a standard sewing machine, and can be controlled by means of an electric motor that allows very easy operation, including single-stroke punching.

The material feed system operates through a special alternating-motion feed dog, while the hole spacing (adjustable by means of a dedicated lever) can be set from 2 to 20 mm.

The 962.01 is supplied with two adapters: one for needle punches and the other for punch blocks.

Antolli

CBR SP

Upper moulding machine without plates:

Central plate stroke 350 mm with recirculating ball-bearing slide guides
Side plate movement with recirculating ball-bearing slide guides
Safety system preventing accidental hand crushing
Touch screen programmer for easy control of all machine functions
Automatic or pulse-operated descent of the central plate
Adjustment of the central plate descent speed
Micrometric adjustment of the side plates
Energy-saving system

Gatti F.lli

AF3200S

Hydro-pneumatic toe-shaping machine for moulding the front part of the upper, equipped with an aluminium plate assembly.

Adjustable stroke and descent speed
Electronic control panel for setting shaping temperature and cycle time
Control panel for adjusting the pressure of the side plates

Volber

401

Hydro-pneumatic machine for toe upper moulding with central aluminium plate, standard profile and normal length.

Adjustment of plate opening and closing through graduated control lever for material thickness change, quick plate replacement, machine height adjustment, separate electronically controlled heating systems.

Adjustments: central plate lowering speed, side plate pressure, external upper locking strip pressure.

Cerim

K174 - due posti di lavoro

Roughing, pounding and brushing machine for processing the bottom of lasted footwear, fully computerized with two working stations.

Machine suitable for processing all types of footwear: men’s, women’s, children’s shoes and boots.

Three operating combinations:

roughing/pounding
roughing/brushing
pounding/brushing

Cerim

K176

Fully computerized brushing and gluing machine with two working stations for processing the bottom of lasted footwear.

Machine suitable for processing all types of footwear (men’s, women’s, children’s shoes and boots) with any type of adhesive.

Gatti F.lli

A.F.69

Roughing machine for preparing free uppers prior to the toe-lasting and lasting operations.

Fini

Rotar MICRO

Soundproof rotary screw compressor with Poly-V belt drive.

Also available mounted on a 200 L air receiver, with or without an integrated dryer.

Fini

Rotar QUADRO

Rotary screw compressor also available mounted on an air receiver of up to 500 L, with or without an integrated dryer, featuring power ratings from 7.5 to 15 kW and noise levels ranging from 68 to 70 dB(A).

Fini

Rotar K-MAX

Direct-drive rotary screw compressor without gears.

Also available mounted on a 500 L air receiver, with or without dryer, and in a variable-speed version. Available with power ratings from 11 to 15 kW and noise levels ranging from 65 to 68 dB(A).

Colli FGB

GP20

Machine for trimming the lining of eyelets and slots, available mounted on a table for upper trimming operations or on a column for trimming finished footwear.

During operation, the counter-punch arm can be rotated, allowing trimming at any point on the shoe or upper.

The machine is adjustable to accommodate the trimming of linings with different thicknesses.

The machine is supplied with a profiled grinding wheel for sharpening both the punch and the counter-punch.

Fini

Rotar PLUS SD

Rotary screw compressor with Poly-V belt drive, available with power ratings from 18.5 to 22 kW and noise levels ranging from 70 to 71 dB(A).

Fini

Rotar TOP

Rotary screw compressor with Poly-V belt drive, available with power ratings from 30 to 37 kW and noise levels ranging from 71 to 72 dB(A).

Cgc

Z-10 (CEE)

Bottom beating machine for processing the shoe bottom and for leather ironing operations on women's footwear.

A roller-type beating disc equipped with rings performs the shoe bottom processing, while a series of heated hammers (side and front) carry out the leather ironing operation.

Cgc

Z-9 (CEE)

Bottom beating machine for processing the shoe bottom and for leather ironing operations on men's footwear and boots.

A roller-type beating disc equipped with rings performs the shoe bottom processing, while a series of heated hammers (side and front) carry out the leather ironing operation.

The machine is also equipped with a side diamond grinding wheel connected to a built-in dust extraction unit.

Cerim

K 78 SZ T.I.

Electromechanical (non-electronic), hydraulic and automatic toe-lasting machine suitable for any type of processing: from children's footwear to all types of women's footwear, with any heel height, up to the largest men's sizes, including safety footwear with steel toe cap.

Standard equipment: 9 rotating pincers, optical projector, movable side lasting plates, motorized plate stroke and timers for pincer opening adjustment, Teflon unit, side pressers, unit for automatic edge injection of thermoplastic adhesive, double support column stroke and pressure reducer panel, SZ unit for side-to-seat lasting operations.

Colli FGB

GP2

Machine for trimming the outer linings of men's and women's shoe uppers.

Thanks to its high cutting speed and the conveyor counter-knife device, it is particularly suitable for high-volume production.

The machine is supplied with a profiled grinding wheel for sharpening the trimming knife.

Cerim

K078

Electronic and hydraulic toe-lasting machine, fully programmable through a 10" multilingual colour touch screen display with self-diagnostic functions. Last change during processing in less than 2 minutes.

Standard equipment: 9 independent pincers, optical projector, movable side lasting plates, motorized plate stroke and timers for pincer opening adjustment, rotating and opening pincers, Teflon toe wrapping unit, SZ unit for side-to-seat lasting operations, side pressers, adhesive tracing system, motorized plate stroke device, pressure reducers and 10" touch screen display.

Cerim

K201T

Computerized toe-lasting machine, hydraulic and fully programmable through a 12" multilingual colour touch screen display with self-diagnostic functions. Last change during processing in less than 2 minutes.

Standard equipment: 9 independent pincers, optical projector, movable side lasting plates, motorized plate stroke and timers for pincer opening adjustment, rotating and opening pincers, Teflon toe wrapping unit, SZ unit for side-to-seat lasting operations, side pressers, adhesive tracing system, differentiated automatic pulling on three pincer groups, right-left rear heel band presser, motorized and programmable pincer arrangement, additional Teflon pistons and 12" touch screen display.