Home (7)

Fontana

TERMOVACUUM

Vacuum-operated hot-fix applicator for the heat application of metal studs and hot-fix rhinestones on fabric, leather, synthetic materials and similar substrates.

It can be used to apply any type of thermo-adhesive item, including shaped components.

The unit is equipped with a profiled heated tip, interchangeable according to the shape of the rhinestone or thermo-adhesive stud being applied.

When used with the vacuum system, the Thermo Vacuum applies loose accessories individually; when used without vacuum, it can apply pre-arranged designs supplied on transfer sheets.

Stema

RT07

Equipment for temperature control of two FS07 ironing tools.

Through the temperature controllers on the control panel, it is possible to adjust and maintain constant over time the temperature of the ironing tools from 50°C to 250°C.

If necessary, a jet of steam helps soften the leather.

Iron Fox

A 250 MP-F

Halogenating machine designed to perform treatment on a wide range of sole types, including box-edge soles, for which the supplied double nozzle is recommended.

Volber

303

Bonding machine with manual rotation of the iron working table, electronic temperature control and pressing plate with non-stick Teflon coating.

Cerim

K58 TP

Computerized hydraulic and automatic toe-lasting and side-lasting machine for thermoplastic and water-based adhesives.

Suitable for any type of processing, from children's footwear to all types of women's footwear, with any heel height, up to the largest men's sizes.

Programmable path for adhesive application on quarters and toe area directly onto the insole.

Standard equipment: quick-adjustment rod unit, independent pincer pulling unit with automatic and manual operation, both vertical and horizontal, tracing device for automatic spreading of thermoplastic adhesive on the insole, touch screen programming system.

Cerim

K24TP

Computerized toe-lasting machine with thermoplastic adhesive and nails.

Programmable path for thermoplastic adhesive application on quarters and toe area directly onto the insole.

Standard equipment: programmable spreading of thermoplastic adhesive on the insole, independent pincer pulling unit with automatic and manual operation, both vertical and horizontal, automatic and programmable device for differentiated right-left wiper arrangement, programmable rod unit, touch screen programming system.

Antolli

T.EC./A1

Electro-pneumatic bench-mounted tape cutting machine featuring:

Cold cutting unit with self-sharpening hardened steel blades arranged in a scissor configuration
Digital programmer for all machine functions
Material positioning by means of a stepper motor
Roll and spool holder
Material feed speed adjustable from 5 to 55 m/min

Sagitta

MB 10 C

Punching machine complete with a waste extraction system, driven by a variable-speed clutch motor.

The machine is equipped with a feed mechanism featuring straight-line feed dog movement and stitch/feed pitch adjustment by means of a graduated millimetric slide control.

Sagitta

FAS 7 BC

Perforating machine designed for punching lace holes in footwear uppers.

It allows the simultaneous perforation of both sides of the upper and enables the operator to select the number of holes to be punched, up to a maximum of 7 holes per side, by adjusting the perforator presser assembly.

The curvature of the perforation line can be adjusted using two control levers located on the sides of the machine.

A control knob positioned on the right side of the machine allows adjustment of the distance between the centres of consecutive holes.

The set of 7 perforators, complete with punches and dies, can be supplied in a range of 10 sizes from 1.8 mm to 4.8 mm.

Atom

S124 CE

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Atom

S124C CE

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Strobel

443-1

Heavy-duty machine designed for stitching insoles to uppers.

Compared with conventional attachment methods, the Strobel stitching process significantly reduces material consumption.

This machine is capable of sewing leather or textile materials up to 7 mm thick.

The gathering device assists in creating fullness while stitching the upper.

Optional equipment (different feed systems and front cups) enables the machine to manufacture children's footwear or process particularly delicate materials.

Kits are also available for cord attachment applications (using cords up to 1.7 mm or up to 2.5 mm in diameter) as well as for California-type footwear construction.

Camarb

Camarb N25-STR2S

Thigh performance sewing machine for shoe’s insoles and for other materials such as leather, fur, wool, mutton and fabrics.

Rotary feed dog and rear cup drive, chain stitch.

Useful for many applications: it is particularly suitable to sew mutton boots but also for nappa, wool, fur, leather and safety shoes.

Suitable also for finishing works of some upper’s sections and for the insole’s application to the upper.

These two parts are sewed by a flat and elastic stitch, which let to lightly improve the shoe’s outline.

Sps Tecnologia Meccanica

TOR3

Manual bench press with 95 mm throat depth and 3,900 kg pressing force.

Sps Tecnologia Meccanica

TOR4

Manual bench press with 125 mm throat depth and 4,200 kg pressing force.

Sps Tecnologia Meccanica

962.01

Punching machine for perforating materials with needle punches or multiple punch blocks, suitable for footwear manufacturers, leather goods producers, leather garment manufacturers and similar applications.

This machine is driven by a clutch motor, like a standard sewing machine, and can be controlled by means of an electric motor that allows very easy operation, including single-stroke punching.

The material feed system operates through a special alternating-motion feed dog, while the hole spacing (adjustable by means of a dedicated lever) can be set from 2 to 20 mm.

The 962.01 is supplied with two adapters: one for needle punches and the other for punch blocks.

Antolli

CBR SP

Upper moulding machine without plates:

Central plate stroke 350 mm with recirculating ball-bearing slide guides
Side plate movement with recirculating ball-bearing slide guides
Safety system preventing accidental hand crushing
Touch screen programmer for easy control of all machine functions
Automatic or pulse-operated descent of the central plate
Adjustment of the central plate descent speed
Micrometric adjustment of the side plates
Energy-saving system

Gatti F.lli

AF3200S

Hydro-pneumatic toe-shaping machine for moulding the front part of the upper, equipped with an aluminium plate assembly.

Adjustable stroke and descent speed
Electronic control panel for setting shaping temperature and cycle time
Control panel for adjusting the pressure of the side plates

Volber

401

Hydro-pneumatic machine for toe upper moulding with central aluminium plate, standard profile and normal length.

Adjustment of plate opening and closing through graduated control lever for material thickness change, quick plate replacement, machine height adjustment, separate electronically controlled heating systems.

Adjustments: central plate lowering speed, side plate pressure, external upper locking strip pressure.

Cerim

K174 - due posti di lavoro

Roughing, pounding and brushing machine for processing the bottom of lasted footwear, fully computerized with two working stations.

Machine suitable for processing all types of footwear: men’s, women’s, children’s shoes and boots.

Three operating combinations:

roughing/pounding
roughing/brushing
pounding/brushing

Cerim

K176

Fully computerized brushing and gluing machine with two working stations for processing the bottom of lasted footwear.

Machine suitable for processing all types of footwear (men’s, women’s, children’s shoes and boots) with any type of adhesive.

Gatti F.lli

A.F.69

Roughing machine for preparing free uppers prior to the toe-lasting and lasting operations.

Fini

Rotar MICRO

Soundproof rotary screw compressor with Poly-V belt drive.

Also available mounted on a 200 L air receiver, with or without an integrated dryer.

Fini

Rotar QUADRO

Rotary screw compressor also available mounted on an air receiver of up to 500 L, with or without an integrated dryer, featuring power ratings from 7.5 to 15 kW and noise levels ranging from 68 to 70 dB(A).

Fini

Rotar K-MAX

Direct-drive rotary screw compressor without gears.

Also available mounted on a 500 L air receiver, with or without dryer, and in a variable-speed version. Available with power ratings from 11 to 15 kW and noise levels ranging from 65 to 68 dB(A).

Colli FGB

GP20

Machine for trimming the lining of eyelets and slots, available mounted on a table for upper trimming operations or on a column for trimming finished footwear.

During operation, the counter-punch arm can be rotated, allowing trimming at any point on the shoe or upper.

The machine is adjustable to accommodate the trimming of linings with different thicknesses.

The machine is supplied with a profiled grinding wheel for sharpening both the punch and the counter-punch.

Fini

Rotar PLUS SD

Rotary screw compressor with Poly-V belt drive, available with power ratings from 18.5 to 22 kW and noise levels ranging from 70 to 71 dB(A).

Fini

Rotar TOP

Rotary screw compressor with Poly-V belt drive, available with power ratings from 30 to 37 kW and noise levels ranging from 71 to 72 dB(A).

Cgc

Z-10 (CEE)

Bottom beating machine for processing the shoe bottom and for leather ironing operations on women's footwear.

A roller-type beating disc equipped with rings performs the shoe bottom processing, while a series of heated hammers (side and front) carry out the leather ironing operation.

Cgc

Z-9 (CEE)

Bottom beating machine for processing the shoe bottom and for leather ironing operations on men's footwear and boots.

A roller-type beating disc equipped with rings performs the shoe bottom processing, while a series of heated hammers (side and front) carry out the leather ironing operation.

The machine is also equipped with a side diamond grinding wheel connected to a built-in dust extraction unit.

Cerim

K 78 SZ T.I.

Electromechanical (non-electronic), hydraulic and automatic toe-lasting machine suitable for any type of processing: from children's footwear to all types of women's footwear, with any heel height, up to the largest men's sizes, including safety footwear with steel toe cap.

Standard equipment: 9 rotating pincers, optical projector, movable side lasting plates, motorized plate stroke and timers for pincer opening adjustment, Teflon unit, side pressers, unit for automatic edge injection of thermoplastic adhesive, double support column stroke and pressure reducer panel, SZ unit for side-to-seat lasting operations.

Colli FGB

GP2

Machine for trimming the outer linings of men's and women's shoe uppers.

Thanks to its high cutting speed and the conveyor counter-knife device, it is particularly suitable for high-volume production.

The machine is supplied with a profiled grinding wheel for sharpening the trimming knife.

Cerim

K078

Electronic and hydraulic toe-lasting machine, fully programmable through a 10" multilingual colour touch screen display with self-diagnostic functions. Last change during processing in less than 2 minutes.

Standard equipment: 9 independent pincers, optical projector, movable side lasting plates, motorized plate stroke and timers for pincer opening adjustment, rotating and opening pincers, Teflon toe wrapping unit, SZ unit for side-to-seat lasting operations, side pressers, adhesive tracing system, motorized plate stroke device, pressure reducers and 10" touch screen display.

Cerim

K201T

Computerized toe-lasting machine, hydraulic and fully programmable through a 12" multilingual colour touch screen display with self-diagnostic functions. Last change during processing in less than 2 minutes.

Standard equipment: 9 independent pincers, optical projector, movable side lasting plates, motorized plate stroke and timers for pincer opening adjustment, rotating and opening pincers, Teflon toe wrapping unit, SZ unit for side-to-seat lasting operations, side pressers, adhesive tracing system, differentiated automatic pulling on three pincer groups, right-left rear heel band presser, motorized and programmable pincer arrangement, additional Teflon pistons and 12" touch screen display.

Fini

Rotar MEGA SD

Rotary screw compressor with Poly-V belt drive, available with power ratings from 37 to 55 kW and noise levels ranging from 70 to 74 dB(A).

Fini

Rotar GIGA SD

Rotary screw compressor with Poly-V belt drive, available with power ratings from 55 to 75 kW and noise levels ranging from 70 to 72 dB(A).

Fini

Rotar TERA SD

Direct-drive rotary screw compressor available with power ratings from 75 to 340 kW and noise levels ranging from 73 to 76 dB(A).

Fratelli Alberti

CU M1

Skiving machine for heavy-duty materials (leatherboard, rubber, stiffeners) with motorized upper roller and automatic material feeding system, mounted on cabinet with motor and grinding wheel motor.

Fratelli Alberti

AV2 MSAE

Skiving machine mounted on table with motor, grinding wheel motor, high-performance suction system and speed variator.

Fratelli Alberti

AV2 MA

Skiving machine mounted on table with suction motor and grinding wheel motor.

Fratelli Alberti

AV2 ME

Skiving machine mounted on table with motor, grinding wheel motor and speed variator.

Fratelli Alberti

AV2 M

Skiving machine mounted on table with clutch motor and grinding wheel motor.

Fini

BRAVO

Direct-drive coaxial compressor with a 90 L air receiver, available with power ratings from 2.2 to 3.0 kW and a noise level of 81 dB(A).

Fini

AMICO

Direct-drive coaxial compressor available with 24 L and 50 L air receivers, featuring a 1.5 kW motor and a noise level of 94 dB(A).

Fini

CIAO

Direct-drive coaxial compressor available with 6 L and 24 L air receivers, featuring a 1.1 kW motor and a noise level of 80 dB(A).

Fini

GENIUS

Direct-drive coaxial compressor with a 6 L air receiver, available with power ratings from 1.1 to 1.5 kW and noise levels ranging from 66 to 74 dB(A).

Fini

(OS)

Oil-free scroll compressor available with or without a 200 L or 270 L air receiver, with power ratings ranging from 2.2 to 22 kW and noise levels between 64 and 70 dB(A).

Omac

990V MINI

The 990 V edge-painting machine is suitable for colouring the edges of all types of materials, including leather, synthetic leather, cardboard and similar materials.

Supplied with: 2 shaped rollers (L-shaped and grooved)
Variable-speed motor
Horizontal edge-painting machine with speed variator
Painting roller diameter: 7 mm
Optional: Support stand

Omac

600R

The OMAC 600R is an electro-pneumatic linear folding machine for cold folding operations.

It is designed to perform cold folding on a wide range of leather goods accessories, including wallets, cheque holders, credit card holders and handbags.

It is also used in the production of diaries, menus, desk accessories, sample folders, and leather or synthetic leather panels.

Folding width adjustable from 5 to 15 mm.

Cerim

X78

The X78 hydraulic toe-lasting machine with 9 pincers and thermoplastic injector is suitable for any type of processing: from the smallest children's sizes to all types of women's footwear, with any heel height, up to the largest men's sizes.

A special kit ensures perfect lasting of safety footwear with steel or plastic toe caps.

Standard equipment: 9 independent pincers, optical projector, movable side lasting plates, motorized plate stroke and timers for pincer opening adjustment, rotating and opening pincers, Teflon toe wrapping unit, SZ unit for side-to-seat lasting operations, side pressers, adhesive tracing system, motorized plate stroke device, pressure reducers and 10" colour touch screen display.

Camoga

C420 L

Macchina spaccatrice luce 420 mm.

Affilatura con comando unico micrometrico e possibilità di impiego di mole al corindone o diamantate
Regolazione rapida pressione di lavoro
Visualizzazione digitale spessore di taglio
Cambio rapido regolo fisso/rullo superiore senza rimozione giunto e correzione spessore automatica.
Aspirazione scarti e polvere di lavorazione
Tendenza lama: nessuna regolazione
Posizionamento lama e recupero consumo: automatico

Intercom

I388

Machine consisting of the B3 extraction bench, S8 adhesive application unit and a mounted and installed CO pressure container.

Extraction bench designed to be placed on a workbench and equipped with a powerful, low-noise motor to provide enhanced overspray extraction capacity.
G6 spray gun designed for both precision bonding applications and large surfaces. Specifically, it allows spray patterns ranging from a minimum of 3 mm up to a maximum of 50 mm.
10-litre stainless steel container with Teflon coating.

Omac

LB410

Machine adapted to smooth the bag edges, straps and all leather components utilized in leather goods and footwear field.

Omac

990TE-V MINI

The 990 V edge-painting machine is suitable for colouring the edges of all types of materials, including leather, synthetic leather, cardboard and similar materials.

Supplied with: 2 shaped rollers (L-shaped and grooved)
Fixed-speed motor
Horizontal edge-painting machine equipped with removable head and speed variator
Painting roller diameter: 16 mm
Optional: Support stand

Stema

ER26TR

Adhesive drying and reactivation machine

Linear conveyor system for shoes and soles reducing solvent evaporation times
LOADING: The operator or operators applying adhesive manually or by machine place the shoe-boot and sole onto the conveyor belt
EVAPORATION: Inside the tunnel, the solvent contained in the adhesive is forced to evaporate
REACTIVATION: At the end of the cycle, the press operator collects the shoe and sole perfectly reactivated and ready for assembly. Reactivation temperature is guaranteed by 2 optical sensors. OPANKA reactivation for the last can also be included

Transmatic

REV 5S

Electric heat press with dual working stations and a movable pantograph-type heated platen.

No compressed air required
Closing operation by means of side push-buttons with automatic opening
Digital electronic control of time, temperature and pressure, with fault indication via touch-screen interface
Interchangeable lower platen
Optional accessory available for cap printing
Piece counter and Nomex cover included

Omac

997 TR 2

Automatic horizontal edge-painting machine with variable speed control, designed to colour shaped components, zipper pulls and strips from 2.5 mm in width and 50 mm in length.

The 997 is an edge-colouring machine featuring an innovative design and a revolutionary operating system.

The distinctive horizontal working surface significantly reduces operator effort while increasing productivity.

Suitable for colouring belts and edge trims used in leather goods and luggage manufacturing (width from 10 mm to 60 mm)
Also allows pre-colouring of the tip edge
The integrated photocell enables rapid material feeding
Available as a head unit only or complete with support stand

Omac

E60

Oven equipped with 5 shelves.

Electronic setting of temperature and drying time, with automatic shelf lowering
Pneumatic door opening and closing system
Manual tray loading
Useful working dimensions: W = 600 mm, D = 560 mm, H = 600 mm
Maximum temperature: 110°C
Visual alarm

Intercom

I788

B7 extraction bench, S8 adhesive application unit and CO pressure container consisting of:

Extraction bench with excellent overspray containment capacity, equipped with a powerful and low-noise motor
G6 spray gun designed for both precision bonding applications and large surfaces. Specifically, it allows spray patterns ranging from a minimum of 3 mm up to a maximum of 50 mm
5-litre stainless steel container with non-stick Teflon coating

Colli FGB

GP11S

Trimming machine suitable for trimming the surplus in the mid-edge of technical articles and footwear injected in rubber and PU.

Matic

M49CG

Heel-seat shaping machine equipped with 2 heated stations and 2 cooled stations for upper toe pre-forming, featuring an inflatable diaphragm system.

Suitable for processing all types of uppers and particularly recommended for thermoplastic or heat-activated counters.

Stema

RTV07

Equipment for temperature and steam control of the FS08 ironing tool.

Through the temperature controller on the control panel, it is possible to adjust and maintain constant over time the temperature of the ironing tool.

If necessary, a jet of steam helps soften the leather.

Oshima

OP-450GS

Continuous fusing machine for fabrics equipped with trolley.

Belt width: 45 cm
The machine is open on one side, allowing the fusing of fabrics wider than the belt width
It also enables edge fusing without the need for heat treatment across the entire fabric surface
Maximum pressure: 1.5 kg/cm²
Electronic temperature control ensures a uniform and durable bond between the fabric, fusible interlining and interfacing materials
Rotating scrapers prevent the interlining from sticking to the conveyor belts

Angeleri

DC 140 C

Column-mounted glue dispenser with 2 dispensing guns.

Bramac

Bramac BR-06

Stool with polyurethane seat.

Omac

LB420

Vertical edge-smoothing machine designed for bags, straps and all types of leather components.

It is used in the production of leather goods accessories, footwear, furnishing accessories, decorative elements for automotive and marine applications, and watch straps.

Omac

LB460

Horizontal rotary edge-smoothing machine designed for hot smoothing of the edges of leather accessories and products. It is widely used in the production of leather goods accessories, footwear, paper-converting products, clothing, home and office furnishings, decorative elements for automotive and marine applications, riding saddles, leather articles, watch straps and holsters.

Omac

995

The 995 OMAC is an automatic electronic multicutter used for automatic cutting of different types of material: ribbons, zips, strings, or other.

It is used in the production of leather goods, footwear, ski boots, riding saddles, car seat belts, nautical ropes, backpacks and harness belts, gift packing tapes, zippers and hinges, leashes and collars for animals.

It allows you to cut off any size and number of pieces automatically, even 2 or 3 tapes of the same material simultaneously.

The desired number of cuts can be programmed through the display, which will show the progress of the cuts made.