Home (4)

Colli FGB

Spare Parts GP7

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Stema

TS16E

Two-way tunnel for footwear ironing and stabilization with adjustable steam percentage and temperature setting up to 220°C.

The high quality standard achieved by this machine is obtained through the optimal orientation of the nozzles from which hot air and steam jets are released, directly affecting the areas of the footwear that usually present wrinkles and imperfections.

Colli FGB

Spare Parts GP8

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Stema

TS32

Four-way tunnel for footwear ironing and stabilization with adjustable steam percentage and temperature setting up to 220°C.

The high quality standard achieved by this machine is obtained through the optimal orientation of the nozzles from which hot air and steam jets are released, directly affecting the areas of the footwear that usually present wrinkles and imperfections.

Colli FGB

Spare Parts GP11

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Stema

TS16/4

Four-way tunnel for footwear ironing and stabilization with adjustable steam percentage and temperature setting up to 220°C.

The high quality standard achieved by this machine is obtained through the optimal orientation of the nozzles from which hot air and steam jets are released, directly affecting the areas of the footwear that usually present wrinkles and imperfections.

Colli FGB

Spare Parts GP20

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Stema

TR20

Tunnel cooling machine with conveyor belt, designed to accelerate footwear and adhesive stabilization times.

The TR19 is equipped with pneumatic closing system, enhanced ventilation, automatic and manual defrosting system, and adjustable temperature from +10°C to -20°C.

Stema

Spare Parts PP02

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Stema

TR19

Cooling tunnel with conveyor belt, designed to accelerate footwear and adhesive stabilization times.

The TR19 is equipped with pneumatic closing system, enhanced ventilation, automatic and manual defrosting system, and adjustable temperature from +10°C to -20°C.

Stema

Spare Parts PU05

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Stema

Spare Parts RTE31

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Stema

Spare Parts TB03

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Stema

Spare Parts TC04

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Stema

Spare Parts TR19

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Stema

Spare Parts U10BF

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Matic

M928I

"Ideal" heel-seat shaping machine with 2 heated stations, equipped with a pair of moulds and special heated cushions, oscillating pincers and an external toe-puff edge folding device.

Stema

Spare Parts U10M

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Matic

94D

Rotary heel-seat shaping system with 8 working stations: 4 heated and 4 cooled stations, equipped with clamping pincers, toe-puff edge folding device and optical projectors.

Stema

Spare Parts U17BFV

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Matic

M94D/CG

Rotary heel-seat shaping system with 8 working stations: 4 heated stations equipped with moulds and rubber cushions, and 4 cooled stations equipped with moulds and inflatable diaphragms.

Stema

Ricambi U21NT

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Matic

929CG/2RP

Heel-seat shaping machine with 4 working stations: 2 heated stations for upper reactivation and 2 shaping stations, equipped with vacuum inflatable diaphragms and clamping pincers, also fitted on the reactivation stations.

Matic

M928CG

Heel-seat shaping machine equipped with 2 heated stations and vacuum inflatable diaphragms.

Compact Series.

Munari

Spare Parts Vulcan 3000

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Matic

M33CG/2RP

Heel-seat shaping machine with 4 working stations: 2 heated stations for upper reactivation and 2 shaping stations, equipped with inflatable diaphragms and clamping pincers, also fitted on the reactivation stations.

Matic

Spare Parts M94D/CG

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Matic

Spare Parts M50/2R

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Matic

Spare Parts M928CG

INSTRUCTIONS

Before starting, we recommend the REGISTRATION
Click inside the desired SECTION
Select the spare part by clicking in the GREEN field
Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
Click on "CHECK OUT" to complete the order

Sigma

756/U

Automatic universal hydraulic sole attaching machine designed for bonding soles to any type of footwear, equipped with self-adjusting cushions.

Angeleri

MAV 4150 ECOL-S

Double spreading roller gluing machine with 400 mm working width for latex, vinyl and water-based adhesives, equipped with rotating and adjustable glue dosing system.

Independent central and side double feeding system.

All parts in contact with the adhesive are made of stainless steel or aluminium.

Also available with suction system.

Nuova Obe

OBE 14 LP

Pneumatic side-lasting machine using tacks to secure the lining around the collar of the last.

The pincer closing operation and tack driving are controlled by a single two-position foot pedal.

Suitable tacks: flat-head tacks with cylindrical and/or square shank, 1.05 mm diameter, length from 6 to 10 mm.

Nuova Obe

OBE 14 TK P

Pneumatic side-lasting machine using tacks to secure the lining around the collar of the last with a plastic tube.

The pincer closing operation and tack driving are controlled by a single two-position foot pedal.

The machine is equipped with a device that eliminates the need to adjust the hammer when fastening the lining with a plastic tube.

Suitable tacks: flat-head tacks with cylindrical and/or square shank, 1.05 mm diameter, length from 6 to 10 mm.

Nuova Obe

OBE 14 MS

Pneumatic side-lasting machine using micro tacks to secure the lining around the collar of the last.

The pincer closing operation and tack driving are controlled by a single two-position foot pedal.

Suitable tacks: micro tacks with cylindrical shank, 0.7 mm diameter, length from 6 to 8 mm.

Sps Tecnologia Meccanica

520.E.D.A

Fully automatic motor-driven self-piercing eyelet machine with double feeder, particularly suitable for large-scale application of eyelets on materials such as leather, hide, plastic, fabric and others.

Equipped with an electronic control unit allowing the operator to set one or more application programs; once the desired number of eyelets has been reached, the machine stops automatically.

Sps Tecnologia Meccanica

96.E.10

Self-piercing eyelet machine with electric motor operation, applying eyelets one at a time and supplied with eyelet size according to customer requirements.

Equipped with an electronic control unit and adjustable spacing guides, it allows the application of eyelets with shank diameters from 3 to 6.5 mm without the need for pre-punched material.

Sps Tecnologia Meccanica

70.1.PN.A

Automatic pneumatic machine for eyelet application, also on non-punched materials, equipped with feeder and valve pedal control.

Provided with adjustable spacing guides and suitable for applying eyelets with shank diameter from 3 to 6.5 mm.

Sps Tecnologia Meccanica

70.1.PN.A.IN

Automatic pneumatic machine for hidden eyelet application, equipped with feeder and double valve pedal control.

The first pedal positions the material by separating the lining from the outer material, while the second pedal performs the eyelet application.

Provided with adjustable spacing guides and suitable for applying eyelets with shank diameter up to 7 mm.

Stema

SP1

Pneumatic bell press with 1 working station, double-membrane support column adjustment and high vacuum system 13 cm.

The SP1 is used for sole attaching operations:

the first membrane wraps the sole and the shoe (or boot)
the second membrane perfectly assembles the sole onto the shoe-boot.

The support column moves horizontally, the last holder rotates 180° to facilitate loading of the boot leg, and the pressure of the two membranes is adjustable.

Stema

PP01B

Bench-mounted pneumatic press for applying thermoplastic toe puffs to the upper.

Pressing temperatures and times are managed and displayed by temperature controllers and timers, ensuring absolute precision.

Thanks to the installed control panel, it is possible to adjust the presser temperature (from 0°C to 300°C) and the pressing time (from 0 to 99 seconds).

Stema

PP02

Two-station pneumatic press for toe puff application with automatic locking clamp.

The PP02 is suitable for bonding thermoplastic toe puffs to the upper.

Pressing temperatures and times are managed and displayed by temperature controllers and timers, ensuring absolute precision.

Thanks to the installed control panel, it is possible to adjust the presser temperature (from 0°C to 300°C) and the pressing time (from 0 to 99 seconds).

Stema

PU05

Press machine for humidifying the upper and reactivating the toe puff before lasting operations.

Humidifying is carried out through the upper press unit, which heats and injects superheated steam onto the upper, while reactivation is performed by the lower presser, which heats the lining and the toe puff.

The machine is equipped with a control panel allowing adjustment of the lower presser temperature (from 100°C to 200°C), steam injection time (from 0 to 9.9 seconds) and total cycle time (from 0 to 99 seconds).

Temperatures are managed and displayed by temperature controllers ensuring absolute precision.

Stema

PU06

Two-station press machine for humidifying the upper and reactivating the toe puff before lasting operations.

Humidifying is carried out through the upper press unit, which heats and injects superheated steam onto the upper, while reactivation is performed by the lower presser, which heats the lining and the toe puff.

The machine is equipped with a control panel allowing adjustment of the lower presser temperature (from 100°C to 200°C), steam injection time (from 0 to 9.9 seconds) and total cycle time (from 0 to 99 seconds).

Temperatures are managed and displayed by temperature controllers ensuring absolute precision.

RFS Comec

BT4 F

High-power leather cutting press equipped with a CL4 safety light barrier and automatic shuttle table.

The operating cycle is fully automatic and programmable. Pressing time is controlled by a PLC, while heating is managed through a digital temperature controller with display.

RFS Comec

BT4 P

Pressa per la stampa e la placcatura della pelle dotata di:

Carrello automatico
Protezione meccanica o barriera di sicurezza CL4
Riscaldamento superiore, inferiore o doppio.

Il tempo di pressata è gestito da plc ed il riscaldamento è controllato da un termoregolatore visualizzato.

Max Stir

1200 A

Adhesive bonding press equipped with a thermal-magnetic circuit breaker and a stable, heavy-duty cast working plate.

Thanks to the electronic control unit, temperature, timer (with acoustic warning signal) and pressure can be precisely adjusted, with a temperature range from 0 to 250°C.

Max Stir

550 A

Adhesive bonding press equipped with a thermal-magnetic circuit breaker and a stable, heavy-duty cast working plate.

The electronic control unit allows precise adjustment of temperature, timer settings (with acoustic warning signal) and operating temperature from 0 to 250°C.

Tecno 2

T 72/AB UNIVERSALE CON PLCU CUSC.GONF

Hydraulic sole attaching press equipped with PLC control, featuring rubber segmented pressing trays with self-shaping platens and self-adjusting shoe support posts, designed for applying all types of soles, including Louis XV heels.

Equipped with hydraulic trays controlled by PLC and an inflatable cushion system.

Stema

RC09

Thermo-reactivating machine for adhesive on soles and shoe bottoms, with tilting table and infrared heaters for the shoe bottom.

Reactivation of the adhesive on the sole is achieved through infrared lamps: in just a few seconds they bring the sole surface to the required temperature.

Reactivation of the adhesive on the shoe bottom is achieved through electric heating elements positioned beneath the upper stainless steel table.

Thanks to the installed control panel, it is possible to adjust:

Lamp activation time
Pause time (required to standardize the production cycle)
Table temperature for shoe bottom reactivation
Automatic-Manual cycle mode

Sps Tecnologia Meccanica

86.04.PL.E

Pneumatic riveting machine for applying rivets and plastic components, equipped with automatic vibrating feeder for rivet supply.

Machine operation: the lace hook or similar item must be inserted manually into the upper clamp; by pressing the pedal, the machine fastens the complete assembly onto leather or other pre-punched materials.

Sps Tecnologia Meccanica

90.95.PN.A

Automatic riveting machine with special arm.

Thanks to its robustness and application speed, it is particularly suitable for footwear manufacturers, leather goods producers, technical articles, toys, paper converting industries and many other applications.

Thanks to the special shaped steel arm designed according to the specific work requirements, the 90.95.PN.A can apply rivets in special positions.

By replacing the feeder, punch, clamp and die, different sizes and types of rivets can be applied.

The riveting operation on the die can be round or star-shaped according to production requirements.

A light projector can be supplied on request.

Sps Tecnologia Meccanica

90.05.PN.A

Automatic pneumatic riveting machine with special shaped steel arm designed according to specific working requirements, particularly suitable for rivet application in special positions.

Sps Tecnologia Meccanica

82.11.PN.A

Automatic pneumatic long-arm riveting machine with feeder.

Sps Tecnologia Meccanica

85.11.PN.AR.SP

Pneumatic rivet applying machine for automatic application of rivet and washer with two feeders: an upper feeder for supplying the self-piercing rivet and a lower vibrating feeder for washer loading.

It is equipped with a two-step positioning system and is particularly suitable for applications requiring high tear resistance.

Sps Tecnologia Meccanica

75.11.PN.A

Automatic pneumatic rivet applying machine with feeder for rivet supply.

Sagitta

RP NOVA V4

Computer-controlled thermo-folding and gluing machine complete with table and self-ventilated AC motor with automatic positioning.

The RP NOVA V4 features photoelectric sensor-controlled functions. The machine adapts to the individual operator's working method by learning commands and movements during the production of the first piece, storing them in memory and then repeating them automatically, leaving the operator responsible only for guiding the workpiece.

It controls the adhesive flow with exceptional consistency and distributes it inside the fold in the form of fine adhesive filaments.

At the end of each working cycle, the machine stops with the hammer open and activates the glue suction system, preventing adhesive from soiling the upper.

Sagitta

RP 68 TE STP

Thermo-folding and gluing machine for insoles, complete with table and Efka motor with automatic positioning.

The machine is equipped with a height-adjustable presser foot lever and a presser foot that slides within its support, allowing easy processing of anatomical insoles when used with additional optional accessories.

Sagitta

RP 67 TF3B

Thermo-folding and gluing machine with function control through photo-sensors, complete with table and Efka brushless motor with automatic positioning.

The RP 67 TF3B is equipped with electronic automatic control of the following functions:

Adhesive dispensing with programmable delay
Feed pitch variation on external curves with programmable delay according to operating speed
Feed pitch variation on internal curves with programmable delay according to operating speed and automatic cutting operation with adjustable spacing between consecutive cuts
Easy selection of the most suitable photo-sensors according to the geometry of the component to be folded

Comelz

COM 52

Computerized thermo-folding and gluing machine fully programmable through the control console, with storage capacity for up to 99 processing programs and integrated brushless DC motor.

Possibility to adjust the position of presser foot, guide, folder, photocells, feeding system and glue dispensing.

Munari

A/90

Electric seam-flattening machine (Gazelle type) without cutting device, designed to simultaneously apply reinforcing adhesive tape to uppers and boots.

The machine is equipped with an electric pressing system, while material feeding is carried out by an Adiprene roller whose pressure can be adjusted through dedicated control devices.

Munari

A/79

Seam-flattening machine (Gazelle type) without cutting device, designed to simultaneously apply reinforcing adhesive tape to uppers and boots.

The machine is equipped with a pneumatic pressing system, while material feeding is carried out by an Adiprene roller whose pressure can be adjusted through dedicated control devices.

Munari

A/78

Seam-flattening machine (Gazelle type) designed to simultaneously apply reinforcing adhesive tape to uppers and boots.

The machine is equipped with a pneumatic pressing system and a selectable cutting system, either automatic through a dedicated timer or manual via foot pedal operation. Material feeding is carried out by an Adiprene roller, whose pressure can be adjusted using dedicated control devices.

Stema

TC04

The TC04 ironing machine is designed to eliminate footwear defects after lasting operations. It is an essential machine in the footwear assembly process, improving both appearance and product quality.

The machine has been designed to halve energy consumption while improving performance.

Temperature control operates through a three-phase heating element.

The machine is equipped with hot air recovery system, work pause device, temperature display and steam percentage display.

Matic

VR261

Hot moccasin stretching machine complete with 2 pairs of vertically arranged aluminium lasts.

Verdi Line.

Matic

VR461 V

Hot moccasin stretching machine complete with 4 pairs of vertically arranged aluminium lasts featuring heated toe and heel sections.

Verdi Line.

Matic

VR561/2P

Hot and steam moccasin stretching machine complete with 4 pairs of vertically arranged aluminium lasts, including 2 pairs in preheating position, featuring heated toe and heel sections.

Verdi Line.

Matic

VR661S

Hot and steam moccasin stretching machine complete with 6 pairs of vertically arranged aluminium lasts.

Munari

Vulcan 3000

Hot-air seam sealing machine designed to waterproof seams on garments made of water-repellent and breathable materials in the apparel and footwear industries. It is suitable for sealing all types of thermoplastic seam-sealing tapes.

The machine is equipped with an electronic control system (PLC), a pneumatic tape-cutting device and a timed tape-feeding system.

The air temperature is electronically adjustable and can be monitored on the digital temperature controller display.

Material feeding is performed by both transport rollers, whose speed and pressure can be adjusted through dedicated control devices.

Stema

TB04

Bench-mounted thermo-ironing machine.

Removes leather imperfections on footwear or specific types of leather goods with adjustable temperature from 50°C to 500°C.

Stema

TB03

Bench-mounted thread burner blower and thermo-ironing machine.

Removes excess thread from footwear stitching with adjustable temperature from 50°C to 620°C.

Stema

SF37

Compact machine designed for footwear finishing operations, including a thermo-ironing thread burner, a temperature-controlled stainless steel ironing tool and an independent adjustable steam generator.

Stema

RTE31

Equipment for temperature control of FS31 series ironing tools:

FS31X in stainless steel
FS31A in hardened aluminium alloy
FS31 Mignon in aluminium alloy

Through the temperature controllers on the control panel, it is possible to adjust and maintain constant over time the temperature of the ironing tools.

Sicomec

341 BTT

Pneumatic post-bed stamping machine for insoles, equipped with a 4-position cliché holder and mechanical ribbon feed.

Complete with timer unit, electronic temperature controller and optical projector.

Sicomec

TT9 FC

Pneumatic tabletop transfer-printing machine with ribbon feed controlled either by photoelectric sensor or timer.

Complete with pressure regulator, timer unit and electronic temperature controller.

Sicomec

341 BFTT

Pneumatic post-bed lining stamping machine equipped with a numbering unit featuring 10 rows of discs, each with 13 alphanumeric positions.

Complete with timer unit, electronic temperature controller and optical projector.

Sicomec

TF150EL/CN (20 dischi)

Pneumatic post-bed lining stamping machine equipped with an electronic alphanumeric programmer featuring 20 rows of discs, each with 13 alphanumeric positions.

Complete with a controller capable of storing 144 programmable lines, an 8-line display, timer unit, electronic temperature controller and optical projector.

Sicomec

TF150EL/CN (10 dischi)

Pneumatic post-bed lining stamping machine equipped with an electronic alphanumeric programmer featuring 10 rows of discs, each with 13 alphanumeric positions.

Complete with:

Controller with storage capacity for 144 programmable lines
8-line display
Timer unit
Electronic temperature controller
Optical projector

Sicomec

TF160EL/CN

Pneumatic post-bed lining stamping machine equipped with an electronic alphanumeric programmer featuring 20 rows of discs, each with 39 alphanumeric positions.

Complete with a controller capable of storing 144 programmable lines, an 8-line display, movable carriage, closed-upper stamping device, photoelectric safety barrier, timer unit, electronic temperature controller and optical projector.

Sicomec

415 SPEL/CN

Pneumatic post-bed box stamping machine equipped with an electronically controlled numbering unit featuring 35 rows of discs, each with 39 alphanumeric positions.

Complete with a controller capable of storing 144 programmable lines, an 8-line/group display, timer unit and electronic temperature controller.

Sps Tecnologia Meccanica

988.M.PN.A

Pneumatic pedal-operated machine equipped with two revolving turret units, one upper and one lower, carrying 6 different tools or tool sets for punching operations or applications (eyelets, rivets, buckles, hooks, snap fasteners, etc.).

The two revolving units allow different applications to be performed without the need for continuous tool replacement.

The machine is mounted on a metal table with a height-adjustable steel stand.

Sps Tecnologia Meccanica

404.PN.A

Pneumatic machine mounted on height-adjustable stand with diaphragm cylinder, suitable for punching operations (single and multiple) and application of eyelets, rivets, hooks, screw rings, snap fasteners and markings in general.

Stema

U10P

Machine for humidifying/softening toe puffs and quarters with 2 working stations.

Stema

U110T

Total upper humidifying machine with thermoregulated steam at variable pressure.

The U110 humidifying machine series uses the most advanced technology in the “ironing and humidifying” sector, injecting steam onto the leather at adjustable temperatures from 100°C to 170°C, considerably improving both footwear production and quality.

Stema

U10BF

Machine for humidifying/softening toe puff and quarters with 3 working stations.

Fratelli Alberti

COMBI 65

Easy to use and compact, the COMBI 65 rotary bonding machine is designed for applications where space, dimensions and costs must be minimized.

It allows perfect continuous bonding of pre-glued materials without work interruptions.

Temperature, timing and pressure are adjustable within a wide operating range.

Iron Fox

AS 1450

Universal sole attaching machine with 2 working stations, particularly suitable for pressing Opanka-type soles and soles with very high edges, which would be almost impossible to press using traditional machines.

The machine is equipped with mechanical, electromechanical and photoelectric safety systems, as well as electronically adjustable support column.

Camoga

C420 R

Splitting machine with 420 mm working width.

Sharpening system with single micrometric control and possibility of using corundum or diamond grinding wheels
Quick adjustment of working pressure
Digital display of cutting thickness
Quick replacement of fixed guide/rubber feed roller without joint removal and with automatic thickness correction
Extraction system for waste and processing dust
Blade inclination: no adjustment required
Blade positioning and wear compensation: automatic

Camoga

C520 R

Splitting machine with 520 mm working width.

Sharpening system with single micrometric control and possibility of using corundum or diamond grinding wheels
Quick adjustment of working pressure with digital display of cutting thickness
Quick replacement of fixed guide/rubber feed roller without joint removal and with automatic thickness correction
Extraction system for waste and processing dust
Sharpening dust extraction system
CE compliant products
Electrical control with 2 automatic speeds + 2 manual speeds
Blade inclination: no adjustment required
Blade positioning and wear compensation: automatic

Bramac

Bramac BR-HB1-2-NEW

Pneumatic hot press with two working surfaces, suitable for bonding leather with reinforcements or fabrics.

Control panel for programming the machine cycle and temperature
Adjustable pressure and carriage stroke
Heated plate dimensions: 40 × 50 cm
Max. temperature: 245°C

Atom

HSP 588/11

Hydraulic die-cutting machine with moving head and photoelectric safety barrier control system, featuring adjustable stroke up to 150 mm.

Atom

HSP 588/3

Hydraulic die-cutting machine with moving head and photoelectric safety barrier control system, featuring adjustable stroke up to 150 mm.

Atom

HS 588/3

Hydraulic die-cutting machine with moving head and photoelectric safety barrier control system, featuring adjustable stroke up to 150 mm and 700 mm photoelectric safety barrier.

Intercom

I380CR

Manual spray gluing system consisting of a B3 extraction bench mounted on wheels and equipped with an installed S8C gravity-feed adhesive application unit.

The machine consists of:

Extraction bench mounted on a height-adjustable base fitted with wheels for easy relocation within the factory and equipped with a powerful, low-noise motor to provide enhanced overspray extraction capacity
G6 spray gun designed for both precision bonding applications and the adhesive coating of large surfaces
Gravity-feed support system: the spray gun is supplied directly from the adhesive package (bag-in-box), positioned on a dedicated elevated support that allows the adhesive to flow naturally by gravity

Matic

M50S

Toe-shaping machine equipped with 2 heated stations and 2 cooled stations for upper toe pre-forming.

Suitable for processing all types of uppers and particularly recommended for use with thermoplastic or heat-activated toe puffs.

Antolli

Mod. T.T.-E DIGIT/A1

Electro-pneumatic bench-mounted tape cutting machine featuring:

Cold cutting unit with self-sharpening hardened steel blades arranged in a scissor configuration, maximum cutting width 120 mm
Hot cutting unit with heated blade: cutting is performed by thermal fusion (suitable only for synthetic materials) with a cutting width of 110 mm
Digital programmer for all machine functions with the possibility of storing up to 200 programs
Material positioning by means of a stepper motor
Roll and spool holder
Material feed speed adjustable up to 80 cm/sec

Nuova Obe

OBE 11 T

Insole trimming machine.

Can be combined with the OBE 10 model.

Alysum theme section heading

Categories

Home

INFO

BRAMAC SRL

BRAMAC SRL TRANI

SUBSCRIBE NEWSLETTER