550 A

Pneumatic hot press with two working surfaces, suitable for bonding leather with reinforcements or fabrics.

• Control panel for programming the machine cycle and temperature
• Adjustable pressure and carriage stroke
• Heated plate dimensions: 40 × 50 cm
• Max. temperature: 245°C

Bench-mounted pneumatic press for applying thermoplastic toe puffs to the upper.

Pressing temperatures and times are managed and displayed by temperature controllers and timers, ensuring absolute precision.

Thanks to the installed control panel, it is possible to adjust the presser temperature (from 0°C to 300°C) and the pressing time (from 0 to 99 seconds).

Two-station press machine for humidifying the upper and reactivating the toe puff before lasting operations.

Humidifying is carried out through the upper press unit, which heats and injects superheated steam onto the upper, while reactivation is performed by the lower presser, which heats the lining and the toe puff.

The machine is equipped with a control panel allowing adjustment of the lower presser temperature (from 100°C to 200°C), steam injection time (from 0 to 9.9 seconds) and total cycle time (from 0 to 99 seconds).

Temperatures are managed and displayed by temperature controllers ensuring absolute precision.

High-power leather cutting press equipped with a CL4 safety light barrier and automatic shuttle table.

The operating cycle is fully automatic and programmable. Pressing time is controlled by a PLC, while heating is managed through a digital temperature controller with display.

Bell press for sole-to-upper assembly with one working station equipped with electronic safety system with photocell.

• Pressing force suitable for men’s/women’s footwear and boots
• Opening designed to facilitate boot positioning
• Electronic safety system with photocell
• The adjustable support column allows the footwear to be positioned in the desired direction during operation
• Electric adjustment of the support column height
• The increased-height bell allows processing of footwear with higher soles
• Pressure adjustment and machine cycle programming for first and second pressing operations
• Possibility to select manual or automatic working mode

Press for outerwear, heat-transfer applications and leather goods, featuring an air-bladder pressure system with an inflatable rubber membrane and equipped with an electronic control system for pressure, temperature and cycle time.

Pneumatic bell press with 1 working station, double-membrane support column adjustment and high vacuum system 13 cm.

The SP1 is used for sole attaching operations:

• the first membrane wraps the sole and the shoe (or boot)
• the second membrane perfectly assembles the sole onto the shoe-boot.

The support column moves horizontally, the last holder rotates 180° to facilitate loading of the boot leg, and the pressure of the two membranes is adjustable.

Pressa per la stampa e la placcatura della pelle dotata di:

• Carrello automatico
• Protezione meccanica o barriera di sicurezza CL4
• Riscaldamento superiore, inferiore o doppio.

Il tempo di pressata è gestito da plc ed il riscaldamento è controllato da un termoregolatore visualizzato.

Pneumatic hot-stamping and embossing press equipped with an automatic sliding carriage, automatic foil feeding unit for hot stamping widths from 30 to 120 mm, stamping/embossing pressure selector, and electronic temperature control adjustable from 0 to 350°C.

Pneumatic press equipped with a double membrane system for pressing footwear fitted with cup soles.

Hot press for bonding lining, upper and toe puff, essential within a production line, improving component adhesion and facilitating upper lasting through shaping.

• Pressing temperature adjustable through digital thermoregulator
• Complete with table
• Adjustable bonding pressure
• Adjustable upper spreading pressure
• Working temperature: 70° - 80°C
• Possibility to replace cushion and mould
• Heated mould
• Equipped with safety system

Lining-to-upper bonding press equipped with one last for men's or women's footwear.

The machine is fitted with a timer and a special device designed to eliminate wrinkles in the upper during the pressing process.

When combined with spray application systems, it becomes a complete workstation capable of speeding up and optimizing production operations while ensuring excellent bonding quality (including synthetic materials) using water-based adhesives.

Thanks to the special characteristics of the lasts, with adjustable temperatures up to 140°C, the upper is shaped in a way that facilitates the subsequent lasting operations.

Adhesive bonding press equipped with a thermal-magnetic circuit breaker and a stable, heavy-duty cast working plate.

Thanks to the electronic control unit, temperature, timer (with acoustic warning signal) and pressure can be precisely adjusted, with a temperature range from 0 to 250°C.

Pneumatic hot press with two working surfaces, suitable for bonding leather with reinforcements or fabrics.

• Control panel for programming the machine cycle and temperature
• Adjustable pressure and carriage stroke
• Heated plate dimensions: 40 × 60 cm
• Max. temperature: 245°C

Press machine for humidifying the upper and reactivating the toe puff before lasting operations.

Humidifying is carried out through the upper press unit, which heats and injects superheated steam onto the upper, while reactivation is performed by the lower presser, which heats the lining and the toe puff.

The machine is equipped with a control panel allowing adjustment of the lower presser temperature (from 100°C to 200°C), steam injection time (from 0 to 9.9 seconds) and total cycle time (from 0 to 99 seconds).

Temperatures are managed and displayed by temperature controllers ensuring absolute precision.

Embossing press for silicone or similar materials, equipped with a thermometer, timer and pressure switch, allowing all parameters required for the pressing process to be programmed.

Available in three different versions.