Home

ER29
Stema

ER29

Drying and reactivation machine for adhesive on soles and shoes-boots with conveyor belt system.

  • The operator or operators applying adhesive manually or by machine place the sole and shoe/boot onto the conveyor belt
  • Inside the tunnel, the solvent contained in the adhesive is forcibly evaporated
  • At the end of the cycle, the press operator collects the shoe and sole perfectly reactivated and ready for assembly
LO1
Sagitta

LO1

Hydraulic last pulling machine designed for removing lasts from all types of footwear using either a four-section pad or a high pad with six grooves.

The LO1 is equipped with a vertically lifting pad and can be fitted with two different pad types: a low pad with four impressions or a high pad with six grooves.

SS20 SS20 SS20
Comelz

SS20

Computerized skiving machine fully programmable through the control console, with storage capacity for up to 800 different skiving programs.

Possibility to electronically store skiving parameters such as thickness, width, inclination and feeding speed, as well as the distance between the blade and the presser foot.

The feeding roller allows continuous material feeding at the programmed speed or variable speed control through the pedal.

The machine is monitored by electronic sensors and automatically self-adjusts, reducing operator downtime and maintaining maximum efficiency of the working components.

153/3
Volber

153/3

Two-station brushing machine for final cleaning, with two speeds and single suction system, equipped with two built-in cyclone collectors, single suction unit and self-braking motor.

Z-18
Cgc

Z-18

Punching machine for Ideal processing, suitable for perforating leather goods or, in sandal production, for punching strap slots in insoles.

  • The machine features an adjustable stroke for materials up to 10 mm thick
  • Punching is performed by means of a die/punch system operated by pedal control
  • The slot length is determined by the pedal pressing time, while the slot width depends on the diameter of the punch used
  • Available punch diameters: 2 mm – 2.4 mm – 3 mm – 3.5 mm – 4 mm
  • The 18-hole die can be supplied with all holes of the same size or with multiple sizes, up to a maximum of 5 different sizes
  • The hole dimensions correspond exactly to the punch diameters
S588/3 S588/3
Atom

S588/3

Hydraulic die-cutting machine with moving head and photoelectric safety barrier control system, featuring adjustable stroke up to 100 mm and 600 mm photoelectric safety barrier.

E30
Omac

E30

The OMAC® E30 drying oven is designed for drying pre-coloured components of any size used in the production of leather goods accessories, footwear, watch straps and leather desk items.

Equipped with a heated single shelf complete with 2 trays.

SE 24 SE 24
Atom

SE 24

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

PA 111
ITM

PA 111

The PA 111 is a laminating press with book-type opening, designed to facilitate material positioning.

The machine is supplied with a dedicated mould for bonding reinforcements onto elastic sock uppers while simultaneously shaping the toe area.

Thanks to its lever system, it develops a high closing force and can alternatively be supplied, instead of the mould, with a flat working surface featuring felt and silicone on the lower side and PTFE paper on the upper side.

HS 588/10 CE
Atom

HS 588/10 CE

Hydraulic die-cutting machine with moving head and photoelectric safety barrier control system, featuring adjustable stroke up to 150 mm to adapt to the thickness of the materials or the number of layers to be cut.

SE 24C SE 24C
Atom

SE 24C

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

SE 20C SE 20C
Atom

SE 20C

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

S125C S125C
Atom

S125C

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

S 120 S 120
Atom

S 120

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

S125 S125
Atom

S125

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

SE 20 SE 20
Atom

SE 20

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

GP1 GP1
Colli FGB

GP1

Machine for trimming excess flash from rubber, PVC and PU soles and boots.

Equipped with a high cutting speed, the “knife–counter-knife conveyor” system enables fast and precise trimming operations.

The machine is supplied with a profiled grinding wheel for sharpening the trimming knife.

FA 500
ITM

FA 500

Automatic comb punching machine with pitch control and monitoring managed by PLC and touch-screen interface.

Capability to store programs with fixed or variable pitch, both in terms of length and repetitions, and to control the punching speed up to 300 strokes/min.

The comb pattern can be developed up to 80 mm across the entire working width and can be configured with multiple pitches (compatible with comb tools from other manufacturers). The tooling can also be configured with multiple rows of punching dies.

The punching depth can be adjusted during operation without dismantling or loosening any mechanical components.

MF 9.1
Atom

MF 9.1

Hydraulic swing-arm die-cutting machine with “Multiforce” end-stroke system, requiring no cutting force adjustment and allowing immediate transition from small dies to large dies.

APN-08
Sagitta

APN-08

Tape-applying machine complete with table and electronic variable-speed motor with automatic positioning.

This machine applies reinforcing tape to uppers and leather components.

A photo-sensor system activates the automatic tape-cutting device at the end of the upper in the optimal position. The tape can also be cut manually at any desired point during the operation.

Bramac BR-50 Bramac BR-50 Bramac BR-50
Bramac

Bramac BR-50

Bench-mounted Hot Melt adhesive applicator with temperature adjustment and ergonomic gun.

  • Ergonomic gun
  • Interchangeable nozzles in different sizes and sections for every type of application (8 mm - 6 mm - 4 mm)
  • Temperature controller
  • Gun housing with glue collection tray
  • Glue tank integrated into the dispensing gun
70.1.PN.A.PL
Sps Tecnologia Meccanica

70.1.PN.A.PL

Eyelet machine with automatic eyelet feeding from magazine and manual washer positioning on the die.

Suitable for applying plastic eyelets.

Self-piercing system, no pre-punched material required for fastening plastic eyelets, with or without washer, in pneumatic versions.

Volber 32
Volber

Volber 32

2-station gluing hood with motor, designed for centralized suction system.

*Available in different versions.

153
Volber

153

Brushing machine with 2 built-in cyclone collectors, single suction unit and self-braking motor.

OBE 10/11 LP
Nuova Obe

OBE 10/11 LP

Pneumatic single-shot machine designed to fasten insoles and insole boards to the last with nails, combined with an insole trimming unit. Available with push-button or foot-pedal operation upon request.

Nail specifications:

  • Cylindrical shank, 1.05 mm diameter
  • Domed head
  • Length from 12 to 16 mm
97.VIS.E.10
Sps Tecnologia Meccanica

97.VIS.E.10

Electric motor-driven machine for applying self-piercing lace hooks (Vis rings), particularly suitable for the production of footwear, sports footwear, mountain footwear, safety footwear, leather goods, corsetry, technical articles and similar products.

The machine is equipped with a vibrating feeder that ensures perfect feeding of the lace hooks, while riveting on the die can be round or star-shaped upon request.

Upon request, the machine can be supplied with a rotating elbow arm instead of the fixed vertical support, as well as with an optical projector for centering the application point.

The machine is operated by an electronic control unit and, when not in the application phase, electrical power consumption is zero.

SE 22 SE 22
Atom

SE 22

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

SE 25C SE 25C
Atom

SE 25C

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

SE 25 SE 25
Atom

SE 25

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

S120C S120C
Atom

S120C

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

BS4 BS4 BS4
Colli FGB

BS4

Beating and ironing machine equipped with a long anvil arm and, upon request, a support plate. It is used for beating and ironing uppers, boots and, in the leather goods sector, the seams of bags, suitcases, collars, handles, backrests and seats.

The machine is equipped with a heating system for the anvil foot.

The anvil temperature can be adjusted by means of a thermostat controller.

2010.E2.B
Sps Tecnologia Meccanica

2010.E2.B

Computerized machine for creating ornamental patterns with frame movement system.

An innovative interchangeability system allows applications on pieces such as uppers, boot legs and/or strips such as belts to be carried out on the same machine.

On request, interchangeability between studs, rivets, eyelets or simple punching can also be supplied.

P254
Volber

P254

50 mm belt grinding machine with dual motors and double suction system.

ER28BA300 ER28BA300
Stema

ER28BA300

Drying and reactivation machine for water-based adhesive on soles and shoes-boots with conveyor belt system.

  • The operator or operators applying adhesive manually or by machine place the shoe-boot and sole onto the conveyor belt
  • Inside the tunnel, the water contained in the adhesive is evaporated
  • The air blown onto the adhesive is dehumidified
  • At the end of the cycle, the press operator collects the shoe and sole perfectly reactivated and ready for assembly
P254/A INS
Volber

P254/A INS

Fireproof belt grinding machine with dual motors, double suction system and built-in cyclone collectors.

ESA-CB
Sarema

ESA-CB

Electronic hydro-pneumatic seat beating machine equipped with a heated plate and roller, designed for flattening and shaping the heel seat area. It ensures a more accurate matching between the heel seat and the heel, significantly improving the overall quality of the shoe.

Features include adjustable roller rotation and 50 mm linear travel, movable column for boots, left- and right-shoe supports, double beating cycle, independent pressure settings (for beating and pressing operations), and adjustable roller vibration.

The machine is equipped with a soundproof enclosure featuring an automatic lifting door that does not affect cycle time and reduces noise levels to 83 dB(A).

K58 S T.I. NO CE K58 S T.I. NO CE
Cerim

K58 S T.I. NO CE

Glue toe-lasting machine, electromechanical (non-electronic), hydraulic and automatic.

Standard equipment: unit for automatic edge injection of thermoplastic adhesive, automatic support column entry, last height adjustment, adjustable electro-hydraulic controls.

K130 K130 K130
Cerim

K130

Programmable toe lasting and side lasting machine with nails and/or micro tacks.

Standard equipment: independent pincer pulling unit with automatic and manual operation, both vertical and horizontal, automatic and programmable device for differentiated right-left wiper arrangement, fully computerized and programmable unit for automatic nail application on the sides, movable head allowing upper adjustment.

1590.E.10
Sps Tecnologia Meccanica

1590.E.10

Machine for applying self-piercing hooks with electric motor operation, particularly suitable for the production of sports footwear, safety footwear and for corsetry, orthopedic and other applications.

The machine is equipped with a feeder for automatic application of self-piercing hooks and with a rotating elbow arm allowing hook application even in difficult positions. Hook riveting on the die can be round or star-shaped.

Available on request with straight vertical support instead of the elbow arm and with optical projector for centering the application point.

Machine operation is controlled by an electronic control unit and, when not in application phase, electrical power consumption is zero.

2004/10-PN.A
Sps Tecnologia Meccanica

2004/10-PN.A

Automatic pneumatic machine for applying ornamental studs, particularly suitable for creating designs on leather, hide, plastic, fabric and similar materials in various sectors such as footwear manufacturing, leather goods, garment production, gift items and many others.

This machine is equipped with a special vibrating feeder ensuring perfect feeding of the studs into the magazine and then into the application clamp.

The 2004/10-PN.A is supplied with support working table and equipped with a luminous cross projector for positioning the stud at the desired point.