Footwear Machinery

Sagitta

RP 67 TF3B

Macchina ripiegatrice termoincollatrice, con controllo delle funzioni mediante fotosensori, completa di tavolo e motore brushless Efka con posizionamento automatico.

La RP 67 TF3B è dotata di azionamento elettronico automatico delle seguenti funzioni:

• Erogazione colla con ritardo programmabile
• Variazione del passo di trasporto nelle curve esterne con ritardo programmabile in funzione della velocità
• Variazione del passo di trasporto nelle curve interne con ritardo programmabile in funzione della velocità ed esecuzione automatica dei tagli con possibilità di regolazione della distanza tra un taglio ed il successivo
• Scelta facile dei fotosensori più idonei da utilizzare in funzione della geometria del pezzo da ripiegare

Matic

M51/FR SDH

Macchina per la formatura della punta:

• Una stazione fredda per lavorazione STROBEL, NORM o IDEAL
• Una stazione calda per la riattivazione del puntale su tomaia
• La M51/FR SDH è dotata di kit di bilanciamento pneumatico, doppia corsa, controllo idraulico della discesa e teflon speciale

Iron Fox

SAS 812

Drying and reactivating oven for water-based or solvent-based adhesives with touch screen control.

Drying through constant and complete irradiation over the entire surface in short processing times, with the possibility to operate on two channels at different temperatures for upper/sole.

Fontana

THERMOMATIK 60 + MIGNON

Ferro da stiro "Mignon" abbinato all'alimentatore elettronico a bassa tensione "Termomatik 60".

Comelz

STP4

Machine for flattening and reinforcing seams through the application of self-adhesive tape on the upper, equipped with brushless motor.

Automatic tape cutting controlled by photocell.

Colli FGB

GP4

Machine for trimming the outer and inner linings of women's and children's shoe uppers.

The machine is equipped with two motors: one for the reciprocating movement of the trimming knife and the other for the rotary movement of the counter-knife.

The machine is supplied with a profiled grinding wheel for sharpening the trimming knife.

Cgc

Z-10 (CEE)

Bottom beating machine for processing the shoe bottom and for leather ironing operations on women's footwear.

A roller-type beating disc equipped with rings performs the shoe bottom processing, while a series of heated hammers (side and front) carry out the leather ironing operation.

Cerim

K201T

Computerized toe-lasting machine, hydraulic and fully programmable through a 12" multilingual colour touch screen display with self-diagnostic functions. Last change during processing in less than 2 minutes.

Standard equipment: 9 independent pincers, optical projector, movable side lasting plates, motorized plate stroke and timers for pincer opening adjustment, rotating and opening pincers, Teflon toe wrapping unit, SZ unit for side-to-seat lasting operations, side pressers, adhesive tracing system, differentiated automatic pulling on three pincer groups, right-left rear heel band presser, motorized and programmable pincer arrangement, additional Teflon pistons and 12" touch screen display.

Fratelli Alberti

AV2 M

Skiving machine mounted on table with clutch motor and grinding wheel motor.

Fini

GENIUS

Compressore coassiale con serbatoio da 6 lt con potenze da 1,1 a 1,5 kW e rumorosità compresa tra 66 e 74 dB(A).

Sagitta

FAS 7 BC

Macchina perforatrice per l’esecuzione dei fori di passaggio delle stringhe nelle tomaie.

Permette di eseguire la foratura contemporanea di entrambi i lati della tomaia e di selezionare, mediante lo spostamento del pressore dei perforatori, la quantità dei fori da praticare fino ad un massimo di 7 per ogni lato.

È possibile regolare la curvatura della linea di foratura tramite due leve poste sui lati della macchina.

Tramite una manopola posta sulla destra della macchina, si regola la distanza tra il centro di un foro ed il successivo.

La serie di 7 perforatori completi di punzoni e matrici può essere scelta in una gamma di 10 misure comprese fra 1,8 mm e 4,8 mm.

Cerim

K58 TP

Computerized hydraulic and automatic toe-lasting and side-lasting machine for thermoplastic and water-based adhesives.

Suitable for any type of processing, from children's footwear to all types of women's footwear, with any heel height, up to the largest men's sizes.

Programmable path for adhesive application on quarters and toe area directly onto the insole.

Standard equipment: quick-adjustment rod unit, independent pincer pulling unit with automatic and manual operation, both vertical and horizontal, tracing device for automatic spreading of thermoplastic adhesive on the insole, touch screen programming system.

Bramac

Bramac BR-999

Multi-purpose punching press for perforation or application of all types of accessories depending on the tool used.

• Working area lighting
• Laser pointer for calibration according to the thickness of the processed material
• Perforation system calibrated according to the material thickness for enhanced operator safety
• Perforation force adjustment
• Does not require compressed air

Fratelli Alberti

AP6 DUPLEX

Flat bonding machine with double trolley and double heated plate mounted on sheet metal cabinet.

Bramac

Bramac BR-02-ALL-IN-ONE-Q-PLUS

The BR-02-ALL-IN-ONE-Q-PLUS table is a joining bench equipped with Quick Move support, designed for hot melt, water-based and solvent-based adhesive applications. It is equipped with different types of grids, partitions and support surfaces for glue tanks, as well as a drawer containing die-holder handles, cutting dies, ruler and hammer, scissors and sponge.

Equipped with electric columns for working position adjustment (sitting/standing) from 79 cm to 120 cm.

Complete with BR-401 gluing device (precision gluing gun + glue tank).

This version includes two connection points for the suction system.

Bramac

Bramac BR-06

Stool with polyurethane seat.

Bramac

Spare Parts BR-TO-A1-2F

INSTRUCTIONS

• Before starting, we recommend the REGISTRATION
• Click inside the desired SECTION
• Select the spare part by clicking in the GREEN field
• Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
• To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON  IN THE UPPER LEFT"
• After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
• Click on "CHECK OUT" to complete the order

Sps Tecnologia Meccanica

70.1.PN.A.PL

Eyelet machine with automatic eyelet feeding from magazine and manual washer positioning on the die.

Suitable for applying plastic eyelets.

Self-piercing system, no pre-punched material required for fastening plastic eyelets, with or without washer, in pneumatic versions.

Bramac

Trolley CR04

Trolley for joining.

Volber

152/A INS

Fireproof grinding machine with double suction system, built-in collectors and self-braking motor, soundproofed.

Stema

UT12

Total humidifying machine with trolley system for softening and reactivating the shoe/boot toe puff before lasting operations.

The upper automatically enters and exits the humidifying chamber.

The air and steam mixture is adjustable in temperature (from 0°C to 220°C) and in steam percentage.

Stema

TS32

Four-way tunnel for footwear ironing and stabilization with adjustable steam percentage and temperature setting up to 220°C.

The high quality standard achieved by this machine is obtained through the optimal orientation of the nozzles from which hot air and steam jets are released, directly affecting the areas of the footwear that usually present wrinkles and imperfections.

Sps Tecnologia Meccanica

90.05.PN.A

Automatic pneumatic riveting machine with special shaped steel arm designed according to specific working requirements, particularly suitable for rivet application in special positions.

Sigma

163/S

Garbatomaie con piastra in alluminio lunga standard (n° 29 o n°44) per stivali.

Sicomec

TF150EL/CN (20 dischi)

Macchina timbrafodere pneumatica a colonna con programmatore elettronico alfanumerico a 20 file di dischi a 13 posizioni per disco alfanumerico.

Completa di calcolatore a 144 linee memorizzabili, display a 8 righe, gruppo temporizzatore e termoregolatore elettronico, proiettore ottico.

Sagitta

RP 68 TE STP

Macchina ripiegatrice termoincollatrice per sottopiedi, completa di tavolo e motore Efka con posizionamento automatico.

Monta una leva porta piedino regolabile in altezza e un piedino scorrevole nel proprio supporto in modo da poter facilmente lavorare, con l’impiego di ulteriori parti opzionali, anche sottopiedi anatomici.

Matic

VR261

Macchina stiramocassini a caldo completa di 2 paia di forme in alluminio disposte in verticale.

Linea Verdi.

Angeleri

TH82/300 V

Gluing machine for bonding components with hot melt adhesives in preparation for stitching operations in both the footwear and leather goods industries.

The special feature of this adhesive is that it can be applied on one side only, allowing the pre-adhesivized component to be bonded whenever required.

Colli FGB

GP7

Trimming machine suitable for a variety of trimming operations, such as:

• Leather covering of Louis XV heels
• Trimming flash from PU footwear with two-colour injected soles
• Trimming deeply sewn linings on footwear with bound uppers

The oil-bath lubrication of the eccentric moving parts ensures low noise operation.

The machine is supplied with a profiled grinding wheel for sharpening the trimming knife.

Cgc

Z-18

Punching machine for Ideal processing, suitable for perforating leather goods or, in sandal production, for punching strap slots in insoles.

• The machine features an adjustable stroke for materials up to 10 mm thick
• Punching is performed by means of a die/punch system operated by pedal control
• The slot length is determined by the pedal pressing time, while the slot width depends on the diameter of the punch used
• Available punch diameters: 2 mm – 2.4 mm – 3 mm – 3.5 mm – 4 mm
• The 18-hole die can be supplied with all holes of the same size or with multiple sizes, up to a maximum of 5 different sizes
• The hole dimensions correspond exactly to the punch diameters

Atom

HS 588/11

Hydraulic die-cutting machine with moving head and photoelectric safety barrier control system, featuring adjustable stroke up to 150 mm and 700 mm photoelectric safety barrier.

Fratelli Alberti

AV2 MA

Skiving machine mounted on table with suction motor and grinding wheel motor.

Fini

(OS)

Oil-free scroll compressor available with or without a 200 L or 270 L air receiver, with power ratings ranging from 2.2 to 22 kW and noise levels between 64 and 70 dB(A).

Gatti F.lli

AF3200S

Macchina cambratrice idropneumatica per sagomare la parte anteriore della tomaia con gruppo piastre in alluminio.

• Corsa e velocità di discesa regolabili
• Pannello elettronico per il controllo della temperatura e del tempo di cambratura
• Pannello per la regolazione della pressione delle piastre laterali

Sagitta

MB 10 C

Macchina bucatrice completa di sistema di aspirazione scarti, azionata da un motore a frizione a velocità variabile dotata di trasporto con corsa rettilinea della griffa e regolazione del passo con corsoio millimetrato.

Cerim

K58 S T.I. NO CE

Glue toe-lasting machine, electromechanical (non-electronic), hydraulic and automatic.

Standard equipment: unit for automatic edge injection of thermoplastic adhesive, automatic support column entry, last height adjustment, adjustable electro-hydraulic controls.

Bramac

Bramac BR-10

Stool with wooden seat and fixed blade.

Bramac

Bramac BR-03-ALL-IN-ONE-Q

The BR-03-ALL-IN-ONE-Q table is specifically designed for hemming and finishing departments.

This innovative multifunctional table system with Quick Move retractable wheels integrates perfectly into production lines thanks to its high versatility of use as a gluing table, hemming support table and finishing table.

Bramac

Trolley CR05

Trolley for assembly 6 pairs open.

Tecno 2

T 30/1 MONOPOSTO

Pressa pneumatica con doppia membrana per pressatura di calzature con suole a scatola. 

Stema

U17BFV

Humidifying machine for toe puff and quarters with hot air and steam ventilation.

The air and steam mixture is adjustable in temperature up to 220°C and in steam percentage.

Stema

TS16/4

Four-way tunnel for footwear ironing and stabilization with adjustable steam percentage and temperature setting up to 220°C.

The high quality standard achieved by this machine is obtained through the optimal orientation of the nozzles from which hot air and steam jets are released, directly affecting the areas of the footwear that usually present wrinkles and imperfections.

Sps Tecnologia Meccanica

404.PN.A

Pneumatic machine mounted on height-adjustable stand with diaphragm cylinder, suitable for punching operations (single and multiple) and application of eyelets, rivets, hooks, screw rings, snap fasteners and markings in general.

Sps Tecnologia Meccanica

90.95.PN.A

Automatic riveting machine with special arm.

Thanks to its robustness and application speed, it is particularly suitable for footwear manufacturers, leather goods producers, technical articles, toys, paper converting industries and many other applications.

Thanks to the special shaped steel arm designed according to the specific work requirements, the 90.95.PN.A can apply rivets in special positions.

By replacing the feeder, punch, clamp and die, different sizes and types of rivets can be applied.

The riveting operation on the die can be round or star-shaped according to production requirements.

A light projector can be supplied on request.

Sicomec

TF160EL/CN

Macchina timbrafodere pneumatica a colonna con programmatore elettronico alfanumerico a 20 file di dischi a 39 posizioni per disco alfanumerico.

Completa di calcolatore a 144 linee memorizzabili, display a 8 righe, carrello mobile, dispositivo per stampa a tomaia chiusa, barriera fotoelettrica protettiva, gruppo temporizzatore e termoregolatore elettronico, proiettore ottico.

Sagitta

RP NOVA V4

Macchina ripiegatrice-termoincollatrice computerizzata completa di tavolo motore AC autoventilato con posizionamento automatico.

La RP NOVA V4 è dotata del controllo delle funzioni mediante fotocellula: la macchina si adatta alla capacità del singolo operatore in quanto auto apprende i comandi ed i movimenti durante la realizzazione del primo pezzo, li memorizza e quindi li ripete fedelmente lasciando all’operatore il solo compito di guidare il pezzo da lavorare.

Controlla il flusso della colla in modo estremamente regolare e lo distribuisce all’interno della ripiegatura sotto forma di filamenti.

Alla fine di ogni ciclo di lavoro si ferma con il martello aperto ed aziona il risucchio-colla, evitando di sporcare la tomaia.

Matic

VR461 V

Macchina stiramocassini a caldo completa di 4 paia di forme in alluminio disposte in verticale con punta e tallone riscaldato.

Linea Verdi.

Angeleri

DC 120 C

Column-mounted glue dispenser with 2 connections and 2 guns for adhesives with activator, 20 kg capacity.