Home

Camarb N220-100
Camarb

Camarb N220-100

Single needle programmable pattern sewing machine:

  • Equipped with thread trimmer
  • Pneumatic presser foot lifter
  • Electronic backtacking
  • Pneumatic pallet lifter
  • Stepper motor with variable speed
E 380 T
Mapro

E 380 T

Pneumatic column-mounted branding machine equipped with a cliché holder and electric start pedal.

The machine is suitable for marking insoles, heel pads and soles made of any material and is equipped with an electric print-start pedal and an automatic foil feed adjustable from 0 to 200 mm (available in all colours).

Under the effect of heat and pressure, the colouring substance of the foil is transferred onto the workpiece, reproducing the design engraved on the die.

The operating temperature of the marking die is adjustable from 0°C to 150°C by means of a probe-controlled temperature regulator.

The E380T is equipped with a two-hand safety control system and a key-operated electrical limit switch.

Spare Parts BC20/9 Spare Parts BC20/9 Spare Parts BC20/9
CMCI

Spare Parts BC20/9

INSTRUCTIONS



  • Before starting, we recommend the REGISTRATION
  • Click inside the desired SECTION
  • Select the spare part by clicking in the GREEN field
  • Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
  • To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON  IN THE UPPER LEFT"
  • After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
  • Click on "CHECK OUT" to complete the order
CAMARB N150-100
Camarb

CAMARB N150-100

Single-needle programmable pattern sewing machine:

  • Equipped with thread trimmer.
  • Pneumatic presser foot lift.
  • Electronic backtacking.
  • Pneumatic work clamp lift.
  • Integrated stepper motor with variable speed control.
E 32 F E 32 F
Mapro

E 32 F

Pneumatic column-mounted marking machine for linings and complete uppers, equipped with a hot numbering unit featuring 7 discs and an automatic foil feed adjustable from 0 to 200 mm (available in all colours).

Under the effect of heat and pressure, the colouring substance of the foil is transferred onto the workpiece, reproducing the printed characters.

The operating temperature of the marking die is adjustable from 0°C to 150°C by means of a probe-controlled temperature regulator.

Mtype 669 Mtype 669 Mtype 669
Durkopp Adler

Mtype 669

Single-needle free-arm sewing machine mounted on a table and stand, featuring bottom feed.

  • Needle-feed mechanism with alternating presser feet
  • Large hook mounted on a horizontal shaft
  • Control for two different stitch lengths
  • Presser foot stroke adjustable by means of a knob and knee lever during sewing
  • Thread trimming device
  • Automatic presser foot lift
  • Automatic backtacking
Spare Parts LB410
Omac

Spare Parts LB410

INSTRUCTIONS



  • Before starting, we recommend the REGISTRATION
  • Click inside the desired SECTION
  • Select the spare part by clicking in the GREEN field
  • Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
  • To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON  IN THE UPPER LEFT"
  • After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
  • Click on "CHECK OUT" to complete the order
Camarb N300-200
Camarb

Camarb N300-200

Single needle programmable pattern sewing machine:

  • Equipped with thread trimmer
  • Pneumatic presser foot lifter
  • Electric backtracking
  • Pneumatic pallet lifter
  • Stepper motor with variable speed
F 880 F 880
Mapro

F 880

Pneumatic marking machine for linings, uppers and belts, equipped with a hot numbering unit featuring 10 discs and an automatic foil feed adjustable from 0 to 200 mm (available in all colours).

Under the effect of heat and pressure, the colouring substance of the foil is transferred onto the workpiece, reproducing the printed characters.

The contact time between the numbering unit and the workpiece is controlled by an electronic timer adjustable from 0 to 9.99 seconds, while the marking depth can be adjusted by means of an external mechanical stop.

The operating temperature of the marking die is adjustable from 0°C to 150°C by means of a probe-controlled temperature regulator.

Mtype 868 Mtype 868 Mtype 868
Durkopp Adler

Mtype 868

Double-needle post-bed sewing machine mounted on a table and stand, featuring bottom feed:

  • Needle-feed mechanism with alternating presser feet
  • Independently disengageable needle bars
  • Large hook mounted on a horizontal shaft
  • Control for two different stitch lengths
  • Presser foot stroke adjustable by means of a control knob and equipped with thread trimming device
  • Automatic presser foot lift
  • Automatic backtacking
Spare Parts AV2 MA
Fratelli Alberti

Spare Parts AV2 MA

INSTRUCTIONS



  • Before starting, we recommend the REGISTRATION
  • Click inside the desired SECTION
  • Select the spare part by clicking in the GREEN field
  • Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
  • To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON  IN THE UPPER LEFT"
  • After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
  • Click on "CHECK OUT" to complete the order
Camarb N600-400
Camarb

Camarb N600-400

Single-needle programmable pattern sewing machine:

  • Equipped with thread trimmer
  • Pneumatic presser foot lift
  • Electronic backtacking
  • Pneumatic pallet lift
  • Integrated stepper motor with variable speed control
PK 21 N
Mapro

PK 21 N

Pneumatic column-mounted branding machine equipped with a cliché holder, electric start pedal and automatic foil feed adjustable from 0 to 200 mm (available in all colours).

The PK21N is suitable for marking leather goods, leather articles and similar products.

The foil pigment is transferred onto the workpiece, reproducing the design engraved on the die.

Contact time is controlled by an electronic timer adjustable from 0 to 9.99 seconds, while marking depth can be set via an external mechanical stop.

Die temperature is adjustable from 0°C to 150°C through a probe-controlled temperature regulator.

The PK21N is equipped with a two-hand safety control system and a key-operated limit switch.

Mtype 888 Mtype 888 Mtype 888
Durkopp Adler

Mtype 888

Single-needle post-bed sewing machine mounted on a table and stand, featuring bottom feed, rotating feed dog, needle feed and synchronized roller presser foot, large hook mounted on a horizontal shaft, thread trimming device, automatic presser foot lift and automatic backtacking.

Also available in a double-needle version.

Spare Parts SS20
Comelz

Spare Parts SS20

INSTRUCTIONS



  • Before starting, we recommend the REGISTRATION
  • Click inside the desired SECTION
  • Select the spare part by clicking in the GREEN field
  • Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
  • To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON  IN THE UPPER LEFT"
  • After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
  • Click on "CHECK OUT" to complete the order
ECOL 4155 MINI RM
Angeleri

ECOL 4155 MINI RM

Soft roller gluing machine with 150 mm working width for water-based adhesives, equipped with glue dosing system with Teflon-coated doctor blade. The spreading roller allows adhesive application also on irregular surfaces.

All parts in contact with the adhesive are made of stainless steel or aluminium and can be easily dismantled to facilitate cleaning operations.

Also available mounted on table.

527i 527i 527i
Durkopp Adler

527i

Flat-bed single-needle zig-zag sewing machine (10 mm zig-zag width), mounted on table and stand, featuring bottom feed, presser foot, large hook mounted on a horizontal shaft, thread trimmer, automatic presser foot lift and automatic backtacking.

Also available in a double-needle version.

Bramac BR-1295 Bramac BR-1295
Bramac

Bramac BR-1295

Toe shaping machine with 2 hot reactivation stations and 2 cold shaping stations.

  • Control panel for programming the machine cycle and hot/cold temperatures.
  • Full adjustment of moulds and upper pulling clamps.
  • Possibility to manufacture tooling and moulds based on the last sample supplied by the customer.
Spare Parts S120C
Atom

Spare Parts S120C

INSTRUCTIONS



  • Before starting, we recommend the REGISTRATION
  • Click inside the desired SECTION
  • Select the spare part by clicking in the GREEN field
  • Increase or decrease the quantity of the pieces in the "COMPONENTI LISTA / ICON IN THE UPPER LEFT"
  • To cancel a spare part code selected by mistake, click on the "X" in the "COMPONENTI LISTA / ICON  IN THE UPPER LEFT"
  • After choosing the spare parts, click on "INVIA RICHIESTA / CHECKOUT"
  • Click on "CHECK OUT" to complete the order
U10M
Stema

U10M

4-station machine for humidifying/softening moccasins.