Bramac

Bramac BR-100

Machine for tape application and/or upper marking.

• Possibility of horizontal or vertical positioning through a simple operation
• 360° movement on both horizontal and vertical axes
• Positioning tray made of mouldable material to adapt to the sole model

Bramac

Bramac BR-11

Stool with wooden seat and permanent contact with the back.

Bramac

Bramac BR-111

Manual heat press ideal for different types of processing

• Equipped with a working area of 150x150 mm
• It guarantess uniform pressing even at the ends of the work surface
• Using the control panel it is possible to adjust the temperature of the upper plate and the pressing time
• The pressure can be adjusted can be adjusted using the knob above the upper plate
• The maximum thickness worked is 8 mm and the maximum temperature is 232°C

Bramac

Bramac BR-12

Stool with wooden seat and permanent back contact.

Bramac

Bramac BR-1295

Toe shaping machine with 2 hot reactivation stations and 2 cold shaping stations.

• Control panel for programming the machine cycle and hot/cold temperatures.
• Full adjustment of moulds and upper pulling clamps.
• Possibility to manufacture tooling and moulds based on the last sample supplied by the customer.

Bramac

Bramac BR-1296-R-CG

Backpart moulding machine with 2 hot stations and 2 cold stations, equipped with cushions, inflatable pads with vacuum suction system and pincer units also on the reactivation stations.

• Control panel for programming the machine cycle and the temperatures of the hot and cold moulds
• Complete adjustment of moulds, shaping pads and upper pulling pincers
• Optical projectors for correct upper positioning
• Possibility to manufacture tooling and moulds based on the customer’s last sample

Bramac

Bramac BR-1296/4-R-NCG

Backpart moulding machine with 2 hot stations and 2 cold stations, equipped with 4 inflatable pads with vacuum suction system and pincer units also on the reactivation stations.

• Control panel for programming the machine cycle and the temperatures of the hot and cold moulds
• Complete adjustment of moulds, shaping pads and upper pulling pincers
• Optical projectors for correct upper positioning
• Possibility to manufacture tooling and moulds based on the customer’s last sample

Bramac

Bramac BR-13

Stool with wooden seat, footrest, and permanent back contact.

Bramac

Bramac BR-196-N-CG

Hot machine for counter reactivation and backpart moulding on the upper.

The upper locking system is pedal-operated, while the hot cushion descent is controlled by two-hand operation.

Bramac

Bramac BR-2000

Machine designed to inspect leather surfaces for possible defects and marks.

The operation of the BR-2000 is very simple: once the leather is placed on the convex surface, the two rollers stretch its ends, allowing the operator to inspect and mark any imperfections present.

This operation is essential during the cutting process, where only defect-free portions of the leather will be processed.

Bramac

Bramac BR-2008

Vamp crimping machine

• The machine is mainly used to bend and mould vamp in the production of boots
• Adopting hydraulic and pneumatic driving, it utilizes heat and pressure to bend and mould vamp into curved shape required
• The pressure, heating temperature and pressing time can be adjusted according to the thickness and type of leather so as to obtain the optimal shaping result
• The left and right-side pressing plates and their heating temperature
• The external pressing plate is convenient in regulation of travel upon requirement

Bramac

Bramac BR-2008L

Vamp crimping machine

• The machine is mainly used to bend and mould vamp in the production of boots
• Adopting hydraulic and pneumatic driving, it utilizes heat and Pressure to bend and mound vamp into curved shape required
• The pressure, heating temperature and pressing time can be adjusted according to the thickness and type of leather so as to obtain the optimal shaping result
• The left and right-side pressing plates and their heating temperature can be regulated individually to adapt to specific leather
• The external pressing plate is convenient in regulation of travel pon requirement

Bramac

Bramac BR-230N

Vamp pre-forming and ironing machine with one heated station.

• This high efficiency machine is easy to use and allows the costumer to decrease the production time, the production costs and the designing costs
• Control panel for machine cycle’s programming, and for mould temperature
• Teflon coated pull-down pre-forming unit
• Universal silicone mould for pre-forming vamps
• Adjustable optical projector for the correct upper’s positioning

Bramac

Bramac BR-240X

Seam beating and ironing machine for uppers and boots but also stichings of bags, suit-cases, seats and backs.

• Machine equipped with anvil support
• Heated anvil with temperature control until 180° C
• Working plate
• Replacement anvil for 90° beating
• Replacement hammer (smaller size)
• Height adjustable column

Bramac

Bramac BR-260

Heat iron machine

• Thermo-ironing machine for shoes with hot air and steam
• Temperature controlled electronically by a display
• Adjustable air-flow speed
• Adjustable steam output
• Ironing roller
• Pedal for steam-only ironing

Bramac

Bramac BR-50

Benchtop Hot Melt glue applicator with adjustment of the temperature and ergonomic gun

• Ergonomic dispensing gun
• Interchangeable nozzles in different sizes and sections for each type of work (8mm - 6mm - 4mm)
• Temperature regulator
• Gun housing with glue collection tank
• Glue tank incorporated in the dispensing gun

Bramac

Bramac BR-57

Rotating system bonding machine

• Manually adjustment and control
• Human-friendly overturning structure makes easy operation
• The rotary table covered with soft pad and silica gel sheet
• The heat of heating plate will improve the attaching effect by activating the surface glue

Bramac

Bramac BR-58

Hot press for the coupling of the lining, the upper and toe-puff, fundamental in a working group, improves the gluing of the components and facilitates the shaping of the assembly operation.

• The pressing temperature is adjustable thanks to a digital thermoregulator
• Complete with table
• Adjustable coupling pressure
• Adjustable upper stretching pressure
• Working temperature 70°- 80°
• Possibility to replace the pillow and the mould

Bramac

Bramac BR-60

The BR-60 gluing machine is an ergonomic applicator of Hot-Melt adhesives, complete with support base and pedestal. Designed to be easy to use, it is a highly reliable tool. It is equipped with three nozzles of different sizes and two external batteries. Each battery provides a working autonomy of five hours. This autonomy makes this product versatile and easily transportable within the production line.

Bramac

Bramac BR-600-2

Sole assembling machine

• One station sole assembling machine
• High efficiency machine with high pressing power, suitable for both men and women shoes and boots
• Hole for an easier positioning of the boot
• New electronic and photoelectric safety system
• The adjustable rest pole allows the operator to point the shoe in the desired position
• Electric rest pole’s height setting
• The higher bell allows to work shoes with higher bottoms
• Pressure regulation and machine cycle’s programming for first and second pressure
• Manual or Automatic mode selection

Bramac

Bramac BR-800

Double head thread trimming machine, equipped with: 

• Small double razor for each type of footwear
• Wast aspirator with extractable compartment
• Cutting speed regulator
• Table stand for the razor
• Independent razors with 160 cm suction hose
• No compressed air required

Bramac

Bramac BR-850

Automatic edge folding machine ideal for different types of processing

• Equipped with different working modes, automatic and manual
• It can fold both sides, only above and only below
• The molds are quickly and easily equipped
• The upper mold is heated with the possibility of regulating its temperature

Bramac

Bramac BR-868

Multipurpose puncher for holes and the application of each type of accessories according to the tool used.

• Lighting Workspace
• Adjustable laser pointer depending on the thickness of the material being processed
• Finger guard
• Speed regulation
• It does not require compressed air
• Speed selection by means of the modes gradual and rapid
• Controlled descent of the punch

Bramac

Bramac BR-900

BR900 are designed to allow toe upper pre-pulling to verify his integrity. Machine with high working flexibility, suitable for all types of footwear.

• Alu-Mould stroke adjustment
• Rising mould pressure adjustment
• Working time adjustment
• Closing pincers operation is commanded by pedal while hands are yet on alu-mould. • The upper locking plates are adjustable depending on the type numbering and model
• Possibility to customize the work mode