Bramac

Bramac BR-100

Machine for tape application and/or upper marking.

• Possibility of horizontal or vertical positioning through a simple operation
• 360° movement on both horizontal and vertical axes
• Positioning tray made of mouldable material to adapt to the sole model

Bramac

Bramac BR-11

Stool with wooden seat and permanent contact with the back.

Bramac

Bramac BR-111

Manual heat press ideal for different types of processing

• Equipped with a working area of 150x150 mm
• It guarantess uniform pressing even at the ends of the work surface
• Using the control panel it is possible to adjust the temperature of the upper plate and the pressing time
• The pressure can be adjusted can be adjusted using the knob above the upper plate
• The maximum thickness worked is 8 mm and the maximum temperature is 232°C

Bramac

Bramac BR-12

Stool with wooden seat and permanent back contact.

Bramac

Bramac BR-1295

Toe shaping machine with 2 hot reactivation stations and 2 cold shaping stations.

• Control panel for programming the machine cycle and hot/cold temperatures.
• Full adjustment of moulds and upper pulling clamps.
• Possibility to manufacture tooling and moulds based on the last sample supplied by the customer.

Bramac

Bramac BR-1296-R-CG

Backpart moulding machine with 2 hot stations and 2 cold stations, equipped with cushions, inflatable pads with vacuum suction system and pincer units also on the reactivation stations.

• Control panel for programming the machine cycle and the temperatures of the hot and cold moulds
• Complete adjustment of moulds, shaping pads and upper pulling pincers
• Optical projectors for correct upper positioning
• Possibility to manufacture tooling and moulds based on the customer’s last sample

Bramac

Bramac BR-1296/4-R-NCG

Backpart moulding machine with 2 hot stations and 2 cold stations, equipped with 4 inflatable pads with vacuum suction system and pincer units also on the reactivation stations.

• Control panel for programming the machine cycle and the temperatures of the hot and cold moulds
• Complete adjustment of moulds, shaping pads and upper pulling pincers
• Optical projectors for correct upper positioning
• Possibility to manufacture tooling and moulds based on the customer’s last sample

Bramac

Bramac BR-13

Stool with wooden seat, footrest, and permanent back contact.

Bramac

Bramac BR-196-N-CG

Hot machine for counter reactivation and backpart moulding on the upper.

The upper locking system is pedal-operated, while the hot cushion descent is controlled by two-hand operation.

Bramac

Bramac BR-2000

Machine designed to inspect leather surfaces for possible defects and marks.

The operation of the BR-2000 is very simple: once the leather is placed on the convex surface, the two rollers stretch its ends, allowing the operator to inspect and mark any imperfections present.

This operation is essential during the cutting process, where only defect-free portions of the leather will be processed.

Bramac

Bramac BR-2008

Hydropneumatic cambering machine equipped with short plates for standard men’s footwear.

• Combined action of heat and pressure for upper cambering operations
• Independent right/left plate controls for temperature and pressure
• Pressure timing control
• Easy adjustment of the upper plate stroke
• Adjustable plate stroke
• Control panel for temperature, pressure and machine cycle adjustment

Bramac

Bramac BR-2008L

Hydropneumatic cambering machine equipped with long plates for standard women’s footwear and boots.

• Combined action of heat and pressure for upper cambering operations
• Independent right/left plate controls for temperature and pressure
• Pressure timing control
• Easy adjustment of the upper plate stroke
• Adjustable plate stroke
• Control panel for temperature, pressure and machine cycle adjustment

Bramac

Bramac BR-230N

Machine for upper shaping and ironing with one hot station.

• High efficiency system which, thanks to its ease of use, reduces production times as well as assembly and design costs
• Control panel for programming the machine cycle and temperature
• Teflon-coated shaping unit
• Universal silicone mould for upper shaping
• Adjustable optical projector for correct upper positioning

Bramac

Bramac BR-240X

Machine for beating and ironing uppers and boots, as well as assembly seams on bags, suitcases, seats and backrests.

• Beating and ironing machine equipped with anvil arm
• Heated anvil with temperature control up to 180°C
• Support plate
• Spare anvil for 90° beating operations
• Spare hammer (reduced dimensions)
• Height-adjustable column

Bramac

Bramac BR-260

Hot air and steam thermo-ironing machine for footwear with display for electronic temperature setting.

• Variable air speed
• Adjustable steam quantity
• Ironing roller
• Pedal for steam-only ironing operation

Bramac

Bramac BR-50

Bench-mounted Hot Melt adhesive applicator with temperature adjustment and ergonomic gun.

• Ergonomic gun
• Interchangeable nozzles in different sizes and sections for every type of application (8 mm - 6 mm - 4 mm)
• Temperature controller
• Gun housing with glue collection tray
• Glue tank integrated into the dispensing gun

Bramac

Bramac BR-57

Laminating machine with manual rotation control of the rotary table, adjustable stroke, parallel pressing and glue reactivation effect through heated plate.

• The rotary table with 700 mm diameter is covered with a soft mat and silicone sheet
• Manual rotation control
• Easy tilting system to facilitate operations
• Rotary table covered with soft mat and silicone sheet
• Glue reactivation effect through heated plate

Bramac

Bramac BR-58

Hot press for bonding lining, upper and toe puff, essential within a production line, improving component adhesion and facilitating upper lasting through shaping.

• Pressing temperature adjustable through digital thermoregulator
• Complete with table
• Adjustable bonding pressure
• Adjustable upper spreading pressure
• Working temperature: 70° - 80°C
• Possibility to replace cushion and mould
• Heated mould
• Equipped with safety system

Bramac

Bramac BR-60

The BR-60 gluing machine is an ergonomic Hot Melt adhesive applicator, complete with support base and stand. Designed for ease of use, it is a highly reliable tool. It is equipped with three nozzles of different sizes and two external batteries. Each battery provides an operating autonomy of up to five hours. This autonomy makes the machine versatile and easily transportable within the production line.

Bramac

Bramac BR-600-2

Bell press for sole-to-upper assembly with one working station equipped with electronic safety system with photocell.

• Pressing force suitable for men’s/women’s footwear and boots
• Opening designed to facilitate boot positioning
• Electronic safety system with photocell
• The adjustable support column allows the footwear to be positioned in the desired direction during operation
• Electric adjustment of the support column height
• The increased-height bell allows processing of footwear with higher soles
• Pressure adjustment and machine cycle programming for first and second pressing operations
• Possibility to select manual or automatic working mode

Bramac

Bramac BR-800

Double-head thread trimming machine equipped with:

• Double compact trimmer suitable for every type of footwear
• Waste extraction system with removable collection compartment
• Cutting speed regulator
• Table support for the trimmer
• Does not require compressed air
• Independent trimmers with 160 cm suction hose

Bramac

Bramac BR-850

Automatic edge folding machine ideal for different types of processing operations.

• Equipped with different working modes: automatic and manual
• Can fold both sides, upper side only or lower side only
• Mould setup is quick and easy to perform
• The upper mould is heated with adjustable temperature control

Bramac

Bramac BR-868

Multi-purpose punching press for perforation or application of all types of accessories depending on the tool used.

• Working area lighting
• Adjustable laser pointer according to the thickness of the processed material
• Finger safety device
• Speed adjustment
• Does not require compressed air
• Controlled punch descent
• Speed selection through gradual and rapid modes

Bramac

Bramac BR-900

Upper stretching machine for checking upper integrity, with one working station.

• High working flexibility, suitable for all types of footwear
• Last stroke adjustment
• Last lifting pressure adjustment
• Working time adjustment through timer
• The upper locking pincers close through pedal control while the operator’s hands remain free
• The upper locking plates are adjustable according to size and model
• Possibility to customize the working mode