Home

Stema

ER29

Drying and reactivation machine for adhesive on soles and shoes-boots with conveyor belt system.

• The operator or operators applying adhesive manually or by machine place the sole and shoe/boot onto the conveyor belt
• Inside the tunnel, the solvent contained in the adhesive is forcibly evaporated
• At the end of the cycle, the press operator collects the shoe and sole perfectly reactivated and ready for assembly

Sagitta

LO1

Hydraulic last pulling machine designed for removing lasts from all types of footwear using either a four-section pad or a high pad with six grooves.

The LO1 is equipped with a vertically lifting pad and can be fitted with two different pad types: a low pad with four impressions or a high pad with six grooves.

Comelz

SS20

Computerized skiving machine fully programmable through the control console, with storage capacity for up to 800 different skiving programs.

Possibility to electronically store skiving parameters such as thickness, width, inclination and feeding speed, as well as the distance between the blade and the presser foot.

The feeding roller allows continuous material feeding at the programmed speed or variable speed control through the pedal.

The machine is monitored by electronic sensors and automatically self-adjusts, reducing operator downtime and maintaining maximum efficiency of the working components.

Volber

153/3

Two-station brushing machine for final cleaning, with two speeds and single suction system, equipped with two built-in cyclone collectors, single suction unit and self-braking motor.

Cgc

Z-18

Punching machine for Ideal processing, suitable for perforating leather goods or, in sandal production, for punching strap slots in insoles.

• The machine features an adjustable stroke for materials up to 10 mm thick
• Punching is performed by means of a die/punch system operated by pedal control
• The slot length is determined by the pedal pressing time, while the slot width depends on the diameter of the punch used
• Available punch diameters: 2 mm – 2.4 mm – 3 mm – 3.5 mm – 4 mm
• The 18-hole die can be supplied with all holes of the same size or with multiple sizes, up to a maximum of 5 different sizes
• The hole dimensions correspond exactly to the punch diameters

Atom

S588/3

Hydraulic die-cutting machine with moving head and photoelectric safety barrier control system, featuring adjustable stroke up to 100 mm and 600 mm photoelectric safety barrier.

Omac

E30

The OMAC® E30 drying oven is designed for drying pre-coloured components of any size used in the production of leather goods accessories, footwear, watch straps and leather desk items.

Equipped with a heated single shelf complete with 2 trays.

Atom

SE 24

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

ITM

PA 111

The PA 111 is a laminating press with book-type opening, designed to facilitate material positioning.

The machine is supplied with a dedicated mould for bonding reinforcements onto elastic sock uppers while simultaneously shaping the toe area.

Thanks to its lever system, it develops a high closing force and can alternatively be supplied, instead of the mould, with a flat working surface featuring felt and silicone on the lower side and PTFE paper on the upper side.

Atom

HS 588/10 CE

Hydraulic die-cutting machine with moving head and photoelectric safety barrier control system, featuring adjustable stroke up to 150 mm to adapt to the thickness of the materials or the number of layers to be cut.

Atom

SE 24C

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Atom

SE 20C

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Atom

S125C

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Atom

S 120

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Atom

S125

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Atom

SE 20

Hydraulic swing-arm die-cutting machine with automatic end-stroke positioning for the use of dies with different heights, equipped with two push-buttons and potentiometer for cutting force adjustment.

Colli FGB

GP1

Machine for trimming excess flash from rubber, PVC and PU soles and boots.

Equipped with a high cutting speed, the “knife–counter-knife conveyor” system enables fast and precise trimming operations.

The machine is supplied with a profiled grinding wheel for sharpening the trimming knife.

ITM

FA 500

Automatic comb punching machine with pitch control and monitoring managed by PLC and touch-screen interface.

Capability to store programs with fixed or variable pitch, both in terms of length and repetitions, and to control the punching speed up to 300 strokes/min.

The comb pattern can be developed up to 80 mm across the entire working width and can be configured with multiple pitches (compatible with comb tools from other manufacturers). The tooling can also be configured with multiple rows of punching dies.

The punching depth can be adjusted during operation without dismantling or loosening any mechanical components.

Atom

MF 9.1

Hydraulic swing-arm die-cutting machine with “Multiforce” end-stroke system, requiring no cutting force adjustment and allowing immediate transition from small dies to large dies.

Sagitta

APN-08

Tape-applying machine complete with table and electronic variable-speed motor with automatic positioning.

This machine applies reinforcing tape to uppers and leather components.

A photo-sensor system activates the automatic tape-cutting device at the end of the upper in the optimal position. The tape can also be cut manually at any desired point during the operation.

Bramac

Bramac BR-50

Bench-mounted Hot Melt adhesive applicator with temperature adjustment and ergonomic gun.

• Ergonomic gun
• Interchangeable nozzles in different sizes and sections for every type of application (8 mm - 6 mm - 4 mm)
• Temperature controller
• Gun housing with glue collection tray
• Glue tank integrated into the dispensing gun

Sps Tecnologia Meccanica

70.1.PN.A.PL

Eyelet machine with automatic eyelet feeding from magazine and manual washer positioning on the die.

Suitable for applying plastic eyelets.

Self-piercing system, no pre-punched material required for fastening plastic eyelets, with or without washer, in pneumatic versions.

Bramac

Bramac BR-02

Stool with polyurethane seat.

Volber

Volber 3

4-compartment men's last rack.