Home

Stema

RC09

Thermo-reactivating machine for adhesive on soles and shoe bottoms, with tilting table and infrared heaters for the shoe bottom.

Reactivation of the adhesive on the sole is achieved through infrared lamps: in just a few seconds they bring the sole surface to the required temperature.

Reactivation of the adhesive on the shoe bottom is achieved through electric heating elements positioned beneath the upper stainless steel table.

Thanks to the installed control panel, it is possible to adjust:

• Lamp activation time
• Pause time (required to standardize the production cycle)
• Table temperature for shoe bottom reactivation
• Automatic-Manual cycle mode

Sps Tecnologia Meccanica

86.04.PL.E

Pneumatic riveting machine for applying rivets and plastic components, equipped with automatic vibrating feeder for rivet supply.

Machine operation: the lace hook or similar item must be inserted manually into the upper clamp; by pressing the pedal, the machine fastens the complete assembly onto leather or other pre-punched materials.

Sps Tecnologia Meccanica

90.95.PN.A

Automatic riveting machine with special arm.

Thanks to its robustness and application speed, it is particularly suitable for footwear manufacturers, leather goods producers, technical articles, toys, paper converting industries and many other applications.

Thanks to the special shaped steel arm designed according to the specific work requirements, the 90.95.PN.A can apply rivets in special positions.

By replacing the feeder, punch, clamp and die, different sizes and types of rivets can be applied.

The riveting operation on the die can be round or star-shaped according to production requirements.

A light projector can be supplied on request.

Sps Tecnologia Meccanica

90.05.PN.A

Automatic pneumatic riveting machine with special shaped steel arm designed according to specific working requirements, particularly suitable for rivet application in special positions.

Sps Tecnologia Meccanica

82.11.PN.A

Automatic pneumatic long-arm riveting machine with feeder.

Sps Tecnologia Meccanica

85.11.PN.AR.SP

Pneumatic rivet applying machine for automatic application of rivet and washer with two feeders: an upper feeder for supplying the self-piercing rivet and a lower vibrating feeder for washer loading.

It is equipped with a two-step positioning system and is particularly suitable for applications requiring high tear resistance.

Sps Tecnologia Meccanica

75.11.PN.A

Automatic pneumatic rivet applying machine with feeder for rivet supply.

Sagitta

RP NOVA V4

Computer-controlled thermo-folding and gluing machine complete with table and self-ventilated AC motor with automatic positioning.

The RP NOVA V4 features photoelectric sensor-controlled functions. The machine adapts to the individual operator's working method by learning commands and movements during the production of the first piece, storing them in memory and then repeating them automatically, leaving the operator responsible only for guiding the workpiece.

It controls the adhesive flow with exceptional consistency and distributes it inside the fold in the form of fine adhesive filaments.

At the end of each working cycle, the machine stops with the hammer open and activates the glue suction system, preventing adhesive from soiling the upper.

Sagitta

RP 68 TE STP

Thermo-folding and gluing machine for insoles, complete with table and Efka motor with automatic positioning.

The machine is equipped with a height-adjustable presser foot lever and a presser foot that slides within its support, allowing easy processing of anatomical insoles when used with additional optional accessories.

Sagitta

RP 67 TF3B

Thermo-folding and gluing machine with function control through photo-sensors, complete with table and Efka brushless motor with automatic positioning.

The RP 67 TF3B is equipped with electronic automatic control of the following functions:

• Adhesive dispensing with programmable delay
• Feed pitch variation on external curves with programmable delay according to operating speed
• Feed pitch variation on internal curves with programmable delay according to operating speed and automatic cutting operation with adjustable spacing between consecutive cuts
• Easy selection of the most suitable photo-sensors according to the geometry of the component to be folded

Comelz

COM 52

Computerized thermo-folding and gluing machine fully programmable through the control console, with storage capacity for up to 99 processing programs and integrated brushless DC motor.

Possibility to adjust the position of presser foot, guide, folder, photocells, feeding system and glue dispensing.

Munari

A/90

Electric seam-flattening machine (Gazelle type) without cutting device, designed to simultaneously apply reinforcing adhesive tape to uppers and boots.

The machine is equipped with an electric pressing system, while material feeding is carried out by an Adiprene roller whose pressure can be adjusted through dedicated control devices.

Munari

A/79

Seam-flattening machine (Gazelle type) without cutting device, designed to simultaneously apply reinforcing adhesive tape to uppers and boots.

The machine is equipped with a pneumatic pressing system, while material feeding is carried out by an Adiprene roller whose pressure can be adjusted through dedicated control devices.

Munari

A/78

Seam-flattening machine (Gazelle type) designed to simultaneously apply reinforcing adhesive tape to uppers and boots.

The machine is equipped with a pneumatic pressing system and a selectable cutting system, either automatic through a dedicated timer or manual via foot pedal operation. Material feeding is carried out by an Adiprene roller, whose pressure can be adjusted using dedicated control devices.

Stema

TC04

The TC04 ironing machine is designed to eliminate footwear defects after lasting operations. It is an essential machine in the footwear assembly process, improving both appearance and product quality.

The machine has been designed to halve energy consumption while improving performance.

Temperature control operates through a three-phase heating element.

The machine is equipped with hot air recovery system, work pause device, temperature display and steam percentage display.

Matic

VR261

Hot moccasin stretching machine complete with 2 pairs of vertically arranged aluminium lasts.

Verdi Line.

Matic

VR461 V

Hot moccasin stretching machine complete with 4 pairs of vertically arranged aluminium lasts featuring heated toe and heel sections.

Verdi Line.

Matic

VR561/2P

Hot and steam moccasin stretching machine complete with 4 pairs of vertically arranged aluminium lasts, including 2 pairs in preheating position, featuring heated toe and heel sections.

Verdi Line.

Matic

VR661S

Hot and steam moccasin stretching machine complete with 6 pairs of vertically arranged aluminium lasts.

Munari

Vulcan 3000

Hot-air seam sealing machine designed to waterproof seams on garments made of water-repellent and breathable materials in the apparel and footwear industries. It is suitable for sealing all types of thermoplastic seam-sealing tapes.

The machine is equipped with an electronic control system (PLC), a pneumatic tape-cutting device and a timed tape-feeding system.

The air temperature is electronically adjustable and can be monitored on the digital temperature controller display.

Material feeding is performed by both transport rollers, whose speed and pressure can be adjusted through dedicated control devices.

Stema

TB04

Bench-mounted thermo-ironing machine.

Removes leather imperfections on footwear or specific types of leather goods with adjustable temperature from 50°C to 500°C.

Stema

TB03

Bench-mounted thread burner blower and thermo-ironing machine.

Removes excess thread from footwear stitching with adjustable temperature from 50°C to 620°C.

Stema

SF37

Compact machine designed for footwear finishing operations, including a thermo-ironing thread burner, a temperature-controlled stainless steel ironing tool and an independent adjustable steam generator.

Stema

RTE31

Equipment for temperature control of FS31 series ironing tools:

• FS31X in stainless steel
• FS31A in hardened aluminium alloy
• FS31 Mignon in aluminium alloy

Through the temperature controllers on the control panel, it is possible to adjust and maintain constant over time the temperature of the ironing tools.