M.E.P.P. 150

High-power leather cutting press equipped with a CL4 safety light barrier and automatic shuttle table.

The operating cycle is fully automatic and programmable. Pressing time is controlled by a PLC, while heating is managed through a digital temperature controller with display.

Two-station press machine for humidifying the upper and reactivating the toe puff before lasting operations.

Humidifying is carried out through the upper press unit, which heats and injects superheated steam onto the upper, while reactivation is performed by the lower presser, which heats the lining and the toe puff.

The machine is equipped with a control panel allowing adjustment of the lower presser temperature (from 100°C to 200°C), steam injection time (from 0 to 9.9 seconds) and total cycle time (from 0 to 99 seconds).

Temperatures are managed and displayed by temperature controllers ensuring absolute precision.

Lining-to-upper bonding press equipped with one last for men's or women's footwear.

The machine is fitted with a timer and a special device designed to eliminate wrinkles in the upper during the pressing process.

When combined with spray application systems, it becomes a complete workstation capable of speeding up and optimizing production operations while ensuring excellent bonding quality (including synthetic materials) using water-based adhesives.

Thanks to the special characteristics of the lasts, with adjustable temperatures up to 140°C, the upper is shaped in a way that facilitates the subsequent lasting operations.

Embossing press for silicone or similar materials, equipped with a thermometer, timer and pressure switch, allowing all parameters required for the pressing process to be programmed.

Available in three different versions.

Pneumatic hot-stamping and embossing press equipped with an automatic sliding carriage, automatic foil feeding unit for hot stamping widths from 30 to 120 mm, stamping/embossing pressure selector, and electronic temperature control adjustable from 0 to 350°C.

Adhesive bonding press equipped with a thermal-magnetic circuit breaker and a stable, heavy-duty cast working plate.

Thanks to the electronic control unit, temperature, timer (with acoustic warning signal) and pressure can be precisely adjusted, with a temperature range from 0 to 250°C.

Press machine for humidifying the upper and reactivating the toe puff before lasting operations.

Humidifying is carried out through the upper press unit, which heats and injects superheated steam onto the upper, while reactivation is performed by the lower presser, which heats the lining and the toe puff.

The machine is equipped with a control panel allowing adjustment of the lower presser temperature (from 100°C to 200°C), steam injection time (from 0 to 9.9 seconds) and total cycle time (from 0 to 99 seconds).

Temperatures are managed and displayed by temperature controllers ensuring absolute precision.

Pneumatic bell press with 1 working station, double-membrane support column adjustment and high vacuum system 13 cm.

The SP1 is used for sole attaching operations:

• the first membrane wraps the sole and the shoe (or boot)
• the second membrane perfectly assembles the sole onto the shoe-boot.

The support column moves horizontally, the last holder rotates 180° to facilitate loading of the boot leg, and the pressure of the two membranes is adjustable.

Bench-mounted pneumatic press for applying thermoplastic toe puffs to the upper.

Pressing temperatures and times are managed and displayed by temperature controllers and timers, ensuring absolute precision.

Thanks to the installed control panel, it is possible to adjust the presser temperature (from 0°C to 300°C) and the pressing time (from 0 to 99 seconds).

Pneumatic press equipped with a double membrane system for pressing footwear fitted with cup soles.

Elecrtric heat swinger press with double plate and lateral move.

• Long lasting strong construction and a good pressure
• No compressed air needed
• Half-automatic closing and automatic opening
• Electronic and digital touch screen with visual control of temperature, pressure and time with advice of eventual errors
• Exchangeable under plate
• Closing using the side buttons / Automatic opening

Pneumatic hot press with two working surfaces, suitable for bonding leather with reinforcements or fabrics.

• Control panel for programming the machine cycle and temperature
• Adjustable pressure and carriage stroke
• Heated plate dimensions: 40 × 50 cm
• Max. temperature: 245°C

Two-station pneumatic press for toe puff application with automatic locking clamp.

The PP02 is suitable for bonding thermoplastic toe puffs to the upper.

Pressing temperatures and times are managed and displayed by temperature controllers and timers, ensuring absolute precision.

Thanks to the installed control panel, it is possible to adjust the presser temperature (from 0°C to 300°C) and the pressing time (from 0 to 99 seconds).

Hydraulic sole attaching press equipped with PLC control, featuring rubber segmented pressing trays with self-shaping platens and self-adjusting shoe support posts, designed for applying all types of soles, including Louis XV heels.

Equipped with hydraulic trays controlled by PLC and an inflatable cushion system.

Bell press for sole-to-upper assembly with one working station equipped with electronic safety system with photocell.

• Pressing force suitable for men’s/women’s footwear and boots
• Opening designed to facilitate boot positioning
• Electronic safety system with photocell
• The adjustable support column allows the footwear to be positioned in the desired direction during operation
• Electric adjustment of the support column height
• The increased-height bell allows processing of footwear with higher soles
• Pressure adjustment and machine cycle programming for first and second pressing operations
• Possibility to select manual or automatic working mode

Adhesive bonding press equipped with a thermal-magnetic circuit breaker and a stable, heavy-duty cast working plate.

The electronic control unit allows precise adjustment of temperature, timer settings (with acoustic warning signal) and operating temperature from 0 to 250°C.